OpenFoam Windows

bineet_aero · September 25, 2020, 05:19

Hello,

I was able to install OpenFoam-windows 10 and run few tutorials successfully (using "Windows subsystem for Linux"). However, after i restarted my PC and i tried doing some tutorials the error message came that "openfoam is not installed" and can be installed using "sudo apt install openfoam". But after executing this command, the installation could not go through and the error message came "unable to locate package OpenFoam".

Anyone has any idea about how to resolve it. Thanks in advance for your help. Regards

bluebase · October 31, 2020, 19:30

Hi Bineet,

how does your .bashrc look like?
Is the command ". /opt/openfoam8/etc/bashrc" in it?

September 25, 2020, 05:19	OpenFoam Windows	#1
bineet_aero Member Bineet Mehra Join Date: Aug 2013 Posts: 61 Rep Power: 12	Hello, I was able to install OpenFoam-windows 10 and run few tutorials successfully (using "Windows subsystem for Linux"). However, after i restarted my PC and i tried doing some tutorials the error message came that "openfoam is not installed" and can be installed using "sudo apt install openfoam". But after executing this command, the installation could not go through and the error message came "unable to locate package OpenFoam". Anyone has any idea about how to resolve it. Thanks in advance for your help. Regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM 4.0 Released	CFDFoundation	OpenFOAM Announcements from OpenFOAM Foundation	2	October 6, 2017 05:40
OpenFOAM v3.0.1 Training, London, Houston, Berlin, Jan-Mar 2016	cfd.direct	OpenFOAM Announcements from Other Sources	0	January 5, 2016 03:18
Caelus: fork of OpenFOAM	cnsidero	OpenFOAM Announcements from Other Sources	7	November 11, 2014 22:55
Parallel run of OpenFOAM in linux and windows side by side	m2montazari	OpenFOAM Running, Solving & CFD	5	June 24, 2011 03:26
CFX11 + Fortran compiler ?	Mohan	CFX	20	March 30, 2011 18:56

October 31, 2020, 19:30		#2
bluebase Senior Member Sebastian Engel Join Date: Jun 2011 Location: Germany Posts: 566 Rep Power: 20	Hi Bineet, how does your .bashrc look like? Is the command ". /opt/openfoam8/etc/bashrc" in it?