CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Installation

Paraview installation problem please help

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 9, 2009, 07:55
Default Hi, I have reached to step 7
New Member
parham momeni
Join Date: Mar 2009
Location: glasgow, uk
Posts: 25
Rep Power: 9
mcjicpm2 is an unknown quantity at this point
I have reached to step 7 of the installation, I have tested the foamInstallationTest in bin/directory and it was ok. I also tested the cavity example and it is working.
However, after I run rm -rf ParaView3.3-cvs/platforms, when I run buildParaView3.3-cvs It starts to do the installation it will pass the configuration test, but at 52% installation it stopped by the followng error
[ 52%] Building CXX object Utilities/VTKClientServer/Graphics/CMakeFiles/vtkGraphicsCS.dir/vtkGraphicsCSIni t.o
Linking CXX shared library ../../../bin/
[ 52%] Built target vtkGraphicsCS
make: *** [all] Error 2

Can anyone help me please?
mcjicpm2 is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Paraview installation problem mcjicpm2 OpenFOAM Paraview & paraFoam 0 March 9, 2009 08:15
Installation of OpenFoam 15 Compilation paraview soeren_brot OpenFOAM Installation 45 January 12, 2009 07:39
Installation problems about Paraview and PV3foamreader clark_liang OpenFOAM Installation 1 January 12, 2009 07:05
Paraview installation troubles jjhall OpenFOAM Installation 3 April 17, 2008 12:59
Paraview installation problem please help bender OpenFOAM Installation 2 February 27, 2006 06:00

All times are GMT -4. The time now is 11:11.