|
[Sponsors] |
[snappyHexMesh] sharp edges non conformal Mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 3, 2012, 07:06 |
sharp edges non conformal Mesh
|
#1 |
Member
ynos
Join Date: Jan 2011
Posts: 39
Rep Power: 15 |
Hi Foarmers
I use OpenFoam 2.1.1. I am trying mesh a geometry with Hex. elements but i have problem with edge sharp. Attached find pics the mesh and the eMesh and the SHM file. I was trying fix that with differents option such but didnt get improve the mesh : nFeatureSnapIter 10 (Try with 5 10 and 50) resolveFeatureAngle 45 (Try with 25 45 and 90) surfaceFeatureExtract -includedAngle 95 -writeObj constant/triSurface/geom2.stl geom2 I dont want use more elements, i know that i can improve with that: refinementSurfaces and eMesh up level but i dont want more elements Thanks in advanced for your help |
|
October 5, 2012, 12:43 |
|
#2 |
New Member
Thábata Maciel
Join Date: Aug 2012
Posts: 9
Rep Power: 13 |
Hello ynos!
Have you tried snapEdge? http://openfoamwiki.net/index.php/Contrib_snapEdge I'm having some troubles with it myself, but it did wonders with some other features of my mesh! |
|
October 6, 2012, 04:57 |
|
#3 |
Member
ynos
Join Date: Jan 2011
Posts: 39
Rep Power: 15 |
Thanks Thab
Could you tell me how install this utilities and how run,before snappyHM or after??? Thanks in advanced |
|
October 6, 2012, 05:03 |
|
#4 |
Member
ynos
Join Date: Jan 2011
Posts: 39
Rep Power: 15 |
I you look this link
http://www.cfd-online.com/Forums/ope...t-working.html Put that : snapEdge is obsolete with the introduction of version 2.0.x NIkLAS super moderator http://www.cfd-online.com/Forums/ope...t-working.html |
|
October 6, 2012, 11:24 |
|
#5 |
New Member
Thábata Maciel
Join Date: Aug 2012
Posts: 9
Rep Power: 13 |
Hello ynos!
I guess it's obsolete because of the edge handling feature, that came out in 2.0.x. I figured if you tried that already, why not snapEdge? Have you also tried extracting the eMesh file with some other angles? The .eMesh doesn't seem to have captured the features you are having trouble snapping. Try 179 just in case. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
3D Hybrid Mesh Errors | DarrenC | ANSYS Meshing & Geometry | 11 | August 5, 2013 06:42 |
[snappyHexMesh] snappyHexMesh aborting | Tobi | OpenFOAM Meshing & Mesh Conversion | 0 | November 10, 2010 03:23 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 18:10 |