|
[Sponsors] |
[Commercial meshers] Problem in running mesh imported from fluent to foam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 29, 2008, 23:45 |
Problem in running mesh imported from fluent to foam
|
#1 |
Member
Vishal Jambhekar
Join Date: Mar 2009
Location: University Stuttgart, Stuttgart Germany
Posts: 90
Blog Entries: 1
Rep Power: 17 |
Hi,
I have imported a mesh from Fluent to OpenFoam mesh is converted sucessfully but after i apply boundry conditions and run it i am getting following error even if the Courant Number is very small Can anyone help me in this matter: Time = 2.53e-06 Courant Number mean: 0.00019371 max: 0.0119133 diagonal: Solving for rho, Initial residual = 0, Final residual = 0, No Iterations 0 DILUPBiCG: Solving for Ux, Initial residual = 0.000946563, Final residual = 1.76591e-10, No Iterations 1 DILUPBiCG: Solving for Uy, Initial residual = 0.00203507, Final residual = 2.71693e-10, No Iterations 1 DILUPBiCG: Solving for Uz, Initial residual = 0.000729181, Final residual = 2.00435e-10, No Iterations 1 DILUPBiCG: Solving for h, Initial residual = 0.000308165, Final residual = 5.5886e-10, No Iterations 1 Maximum number of iterations exceeded#0 Foam::error::printStack(Foam:stream&) in "/home/user/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so" #1 Foam::error::abort() in "/home/user/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so" #2 Foam::hThermo<foam::puremixture<foam::consttranspo rt<foam::speciethermo<foam::hc onstthermo<foam::perfectgas> > > > >::calculate() in "/home/user/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libbasicThermophysicalMode ls.so" #3 Foam::hThermo<foam::puremixture<foam::consttranspo rt<foam::speciethermo<foam::hc onstthermo<foam::perfectgas> > > > >::correct() in "/home/user/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libbasicThermophysicalMode ls.so" #4 main in "/home/user/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/sonicTurbFoam " #5 __libc_start_main in "/lib64/libc.so.6" #6 Foam::regIOobject::readIfModified() in "/home/user/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/sonicTurbFoam " From function specieThermo<thermo>::T(scalar f, scalar T0, scalar (specieThermo<thermo>::*F)(const scalar) const, scalar (specieThermo<thermo>::*dFdT)(const scalar) const) const in file /home/dm2/henry/OpenFOAM/OpenFOAM-dev/src/thermophysicalModels/specie/lnInclude/ specieThermoI.H at line 78. FOAM aborting Aborted user@zeus10:~/OpenFOAM/Vishal/run/Fluent/Mesh_Fluent>
__________________
Cheers, Vishal Jambhekar... "Simulate the way ahead......!!!" |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem concerning FLUENT dynamic mesh | fabian.g | FLUENT | 0 | August 28, 2017 11:56 |
Fluent mesh problem | mariashva | FLUENT | 1 | August 15, 2017 03:17 |
Problem in running coarse mesh(on the other hand fine mesh is running) | ashokmoravaneni | OpenFOAM | 7 | July 17, 2017 04:56 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
Possible Bug in pimpleFoam (or createPatch) (or fluent3DMeshToFoam) | cfdonline2mohsen | OpenFOAM | 3 | October 21, 2013 09:28 |