|
[Sponsors] |
[Commercial meshers] converting ICEM mesh to OpenFOAM |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 7, 2012, 04:28 |
converting ICEM mesh to OpenFOAM
|
#1 | |
New Member
Blaž Mikuž
Join Date: Sep 2011
Location: Ljubljana
Posts: 29
Rep Power: 14 |
Hello everyone,
I run out of ideas how to solve my problem, so I decided to ask for your help here. I have a mesh made with ICEM and I'd like to import this mesh in OpenFOAM. The mesh has cca 13e6 points and contains solid & fluid regions (it is a model of nuclear reactor fuel assembly with spacer grids and mixing vanes...). I want to simulate the water flow through such geometry and I don't need to calculate heat transfer, so I need only mesh for fluid regions. The ICEM mesh is saved in fluent format and converted with fluent3DMeshToFoam to OpenFOAM format. If checkMesh is run after that, I get an error: Quote:
Please help me out! I already tried to increase vm.max_map_count on the system, but it didn't help. Thanks a lot! |
||
Tags |
icem mesh, openfoam |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Commercial meshers] Converting mesh from Icem CFD to OpenFoam | thyxxx | OpenFOAM Meshing & Mesh Conversion | 5 | October 10, 2018 07:04 |
[Commercial meshers] Problem encountered in converting Fluent mesh to OpenFOAM Mesh | sathya123 | OpenFOAM Meshing & Mesh Conversion | 2 | November 22, 2015 03:22 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
[Other] converting mesh data from tetgen to Openfoam!!! | soankerabhinay | OpenFOAM Meshing & Mesh Conversion | 4 | February 16, 2015 20:01 |
Suggestion for a new sub-forum at OpenFOAM's Forum | wyldckat | Site Help, Feedback & Discussions | 20 | October 28, 2014 09:04 |