|
[Sponsors] |
August 23, 2012, 18:20 |
Mesh Creation
|
#1 |
New Member
Luca Franceschini
Join Date: Aug 2012
Posts: 29
Rep Power: 13 |
hello,
I am relatively new to commercial CFD code. I need to simulate the flow in a set of empty Kelvin cells. Something like : http://tu-freiberg.de/fakult4/imfd/f.../index.en.html What do you suggest to do for the grid? which software would you suggest for such a case taking into account the grid creation and the export process for OpenFoam? why? thank you a lot for the suggestions and time |
|
August 29, 2012, 03:20 |
|
#2 |
Senior Member
|
Hello,
looks to me you want to mesh those micro structures mentiond in your link? right? http://www.opensourcecfd.com/confere...0b8b978b532798 http://www.opensourcecfd.com/confere...ceedings-day-1 =>search for "micromodels" presentation goes into the same direction =>You have to be logged in to download presentations. you will find also some publication among "OpenFOAM workshop" presentation, but that server is down at the moment, so I can not link to them. Do you have allready a geometric model (Cad Model) or do you need to create that from microscopy images? Last edited by elvis; August 29, 2012 at 03:38. |
|
August 29, 2012, 04:42 |
|
#3 | ||
New Member
Luca Franceschini
Join Date: Aug 2012
Posts: 29
Rep Power: 13 |
Hi Elvis, thank you a lot for the links and help.
Quote:
Up to now i think of using FreeCAD for the cad Model and Salome or Cubit(for internal knowHow). Then import everything in OpenFoam. But i was asking for some help, since i do not have direct experience of any of these software and i will have to learn them almost completely by myself. So a was looking for some help and suggestions since I start completely from scratch and i am a little scared for all the things i have to learn. I was wondering if anybody knows of compatibility problems between these software. Or if anybody has easier software to suggest. Quote:
Do you have any specific or general suggestion? thank you a lot for your time |
|||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] snappyHexMesh does not create any mesh except one for the reference cell | Arman_N | OpenFOAM Meshing & Mesh Conversion | 1 | May 20, 2019 17:16 |
[ICEM] Creation of hexa dominant mesh and prism layer | gnuboard | ANSYS Meshing & Geometry | 7 | January 11, 2018 04:13 |
[snappyHexMesh] SnappyHexMesh no layers and no decent mesh for complex geometry | pizzaspinate | OpenFOAM Meshing & Mesh Conversion | 1 | February 25, 2015 07:05 |
Mesh motion with Translation & Rotation | Doginal | CFX | 2 | January 12, 2014 06:21 |
[snappyHexMesh] Layers:problem with curvature | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 10 | August 22, 2012 09:03 |