|
[Sponsors] |
[Commercial meshers] Problem in import mesh with two coupled region from gambit |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 31, 2015, 12:17 |
Problem in import mesh with two coupled region from gambit
|
#1 |
Senior Member
Hesam
Join Date: Feb 2015
Posts: 139
Rep Power: 11 |
Hi friends,
I import gambit mesh file with two coupled regions,solid and fluid,then I write this codes: fluentMeshToFoam meshName.msh -writeSets setsToZones -noFlipMap splitMeshRegions -cellZones -overwrite but error is: Adding patches Inserting patch fluid_to_solid to slot 6 out of 6 --> FOAM Warning : From function gAverage(const UList<Type>&) in file /opt/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude/FieldFunctions.C at line 524 empty field, returning zero. --> FOAM FATAL ERROR: request for polyMesh solid from objectRegistry sphereQuench failed available objects of type polyMesh are 1 ( region0 ) From function objectRegistry::lookupObject<Type>(const word&) const in file /opt/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude/objectRegistryTemplates.C at line 140. FOAM aborting Aborted (core dumped) How i can solve this problem ??? |
|
February 3, 2016, 09:06 |
|
#2 |
Senior Member
Hesam
Join Date: Feb 2015
Posts: 139
Rep Power: 11 |
I solve this problem with openfoam 2.1.1 and 2.2.1.
I write this codes in openfoam 2.2.1 and 2.1.1 and then use it on OF1.6ext. |
|
October 30, 2017, 13:20 |
|
#3 |
New Member
ahmadreza
Join Date: Oct 2017
Posts: 1
Rep Power: 0 |
||
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Other] conformed FSI mesh for unstructured fluid region | ashish.svm | OpenFOAM Meshing & Mesh Conversion | 10 | August 2, 2019 09:40 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 19:57 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 22:11 |
problem when I import mesh with cyclic graduated BC | Cyp | OpenFOAM | 0 | March 3, 2011 11:38 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 12:55 |