[Mehrdad.sadeghi]

I produced backgroundMesh in Salome with Regular_1D and Quadrangle_2D algorithms. I export this mesh with .UNV extension. Unfortunately, when I enter the command: ideasUnvToFoam, there are no cell in converted mesh. (I checked *.unv file withe salome and it was ok. please help me to solve this problem.
/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 4.1 |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 4.1
Exec : ideasUnvToFoam backgroundMesh.unv
Date : Jun 22 2017
Time : 10:21:08
Host : "mehrdad-ThinkPad-Edge"
PID : 10919
Case : /home/mehrdad/OpenFOAM/mehrdad-4.1/run/case
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Allowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Processing tag:164
Starting reading units at line 3.
l:1
units:" SI: Meter (newton)"
unitType:2
Unit factors:
Length scale : 1
Force scale : 1
Temperature scale : 1
Temperature offset : 273.15


Processing tag:2420
Skipping tag 2420 on line 9
Skipping section at line 9.

Processing tag:2411
Starting reading points at line 20.
Read 3812 points.

Processing tag:2412
Starting reading cells at line 7647.
First occurrence of element type 11 for cell 1 at line 7648
First occurrence of element type 44 for cell 345 at line 8680
Read 0 cells and 3810 boundary faces.

Sorting boundary faces according to group (patch)

Constructing mesh with non-default patches of size:

End

[the_edge123]

Why did not you use a 3D algorithm ?

--
Fabien