[Gmsh] Problem in Rotating Surfaces in Gmsh -- CFD Online Discussion Forums

February 25, 2017, 03:28

Problem in Rotating Surfaces in Gmsh

fahdme

New Member

Fahd E Alam

Join Date: Mar 2010

Posts: 11

Rep Power: 16

Dear All,

I am a new user in Gmsh. I am trying to rotate few surfaces together against an axis and not getting the type of extrusion I am looking for. I have attached an screenshot and the Gmsh script file (in txt format though).

I am trying to rotate all the surfaces within rectangular space ABCD and my axis/line of rotation is AD. The desired outcome is shown in the right-bottom corner (typical slice of a cheese cake). But, what I am getting is different (see the portion with question mark).

Any suggestions will be greatly appreciated.

bests, fahd

Attached Images

spheretest2.jpg (131.3 KB, 35 views)

Attached Files

spheretest2.txt (2.3 KB, 16 views)

Tags

gmsh, surface rotate

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'Rotating Interior Wall' problem on COMSOL	rubimuzakki	COMSOL	0	March 27, 2018 04:22
Rotating Wall Problem for Elastohyrodnamic Lubrication	dreamchaser	Main CFD Forum	0	September 25, 2014 14:42
[Gmsh] gmsh or gmshToFoam problem?	Madeleine P. Vincent	OpenFOAM Meshing & Mesh Conversion	0	June 19, 2012 08:52
[Gmsh] GMSH Geometry problem	Deets	OpenFOAM Meshing & Mesh Conversion	0	April 15, 2011 10:13
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13

All times are GMT -4. The time now is 12:11.