[manuelffonseca]

Hi i need a decomposeParDict that work for a single precessor, my snappyHexmesh ask me for this file. My OpenFoam is the 2.1 version


---------------------------------------------------------------------------

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Read mesh in = 0.328 s


--> FOAM FATAL IO ERROR:
cannot open file

file: D:/Mis documentos/CFD/Pruebas CFD/Generati
ng-Mesh-using-snappyHexMesh-Codefiles/flange_1/system/decomposeParDict at line 0
.

From function regIOobject::readStream()
in file db/regIOobject/regIOobjectRead.C at line 87.

FOAM exiting

-------------------------------------------------------------------------

i have tried with another decomposeParDict in the tutorial folder, and i obtained this and the snappyHexmesh doesnt work.

Please Help me


-------------------------------------------------------------------------
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Read mesh in = 0.328 s

Overall mesh bounding box : (-0.03 -0.03 -0.03) (0.03 0.03 0.01)
Relative tolerance : 1e-006
Absolute matching distance : 9.38083e-008

Reading refinement surfaces.
Read refinement surfaces in = 0.11 s

Reading refinement shells.
Refinement level 3 for all cells inside refineHole
Read refinement shells in = 0 s

Setting refinement level of surface to be consistent with shells.
Checked shell refinement in = 0.078 s

Reading features.
Refinement level 0 for all cells crossed by feature "flange.eMesh" (767 points,
776 edges).
Detected 18 featurePoints out of 767 on feature flange.eMesh
Read features in = 0.015 s


Determining initial surface intersections
-----------------------------------------

Edge intersection testing:
Number of edges : 25200
Number of edges to retest : 25200
Number of intersected edges : 1507
Calculated surface intersections in = 0.172 s

Initial mesh : cells:8000 faces:25200 points:9261
Cells per refinement level:
0 8000

Adding patches for surface regions
----------------------------------

Patch Type Region
----- ---- ------
flange:

4 wall flange_patch1
5 wall flange_patch2
6 wall flange_patch3
7 wall flange_patch4

Added patches in = 0.016 s

Selecting decompositionMethod simple

Refinement phase
----------------

Found point (-9.23149e-005 -0.0025 -0.0025) in cell 5389 on processor 0

Feature refinement iteration 0
------------------------------