CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] "No layers to generate" - help with layer addition needed

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 27, 2021, 11:22
Default "No layers to generate" - help with layer addition needed
  #1
Member
 
Claudia
Join Date: Mar 2021
Posts: 43
Rep Power: 3
Clau.77 is on a distinguished road
Hey guys!


I am struggling to add layers to my geometry. You can see the whole geometry in the picture (grey = air, green =chocolate, red= tray). I also attatched a screenshot of the tray with its mesh. Now i want to add layers, but i am always getting the message "no layers to generate".


I attached the snappyHexMesh file and the log file.


Could somebody give me some tips? I would really appreciate some help
Attached Images
File Type: png WholeGeometry_Sliced.PNG (155.6 KB, 6 views)
File Type: jpg Form_Mesh.jpg (146.9 KB, 6 views)
Attached Files
File Type: txt log_snappyHexMesh.txt (112.7 KB, 3 views)
File Type: txt snappyHexMeshDict.txt (9.3 KB, 5 views)
Clau.77 is offline   Reply With Quote

Reply

Tags
layers, layers addition, meshing, snappyhexmesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] Layers not growing at all zonda OpenFOAM Meshing & Mesh Conversion 12 June 6, 2020 12:28
[snappyHexMesh] Triangular elements in boundary layers generated by snappyHexMesh mike.franky OpenFOAM Meshing & Mesh Conversion 0 June 3, 2018 10:46
[snappyHexMesh] SHM is not extruding/adding Layers everywhere matthiasd OpenFOAM Meshing & Mesh Conversion 2 October 16, 2016 17:45
[snappyHexMesh] sHM layer process keeps getting killed MBttR OpenFOAM Meshing & Mesh Conversion 4 August 15, 2016 04:21
[snappyHexMesh] SnappyHexMesh no layers and no decent mesh for complex geometry pizzaspinate OpenFOAM Meshing & Mesh Conversion 1 February 25, 2015 08:05


All times are GMT -4. The time now is 18:14.