|
[Sponsors] |
[Salome] small geometry and dimensions, export unv to openFOAM |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 1, 2022, 02:54 |
small geometry and dimensions, export unv to openFOAM
|
#1 |
New Member
ahmad
Join Date: Sep 2022
Posts: 2
Rep Power: 0 |
Hi dear friends. I have a block and I want to mesh this in Salome and export it as an unv file to OpenFOAM. when I made the block in Salome with this number, 10*1*10, it is okay, but when one of the numbers is like 0.1 or 0.01, OpenFOAM solves it as a 2D.
I use NETGEN3D for 3d and NETGEN1-2D for 2d . I don't know the problem. mesh is 3d but in low dimensions, it solves like 2d behavior. and I don't know how to do numbers such as a meter or mm or cm in Salome and OpenFOAM knows it. |
|
Tags |
mesh 3d, salome, small scale modeling, unvtofoam |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Compressible nozzle flow - no problem for fluent but impossible with openFOAM? | flar.t | OpenFOAM Running, Solving & CFD | 10 | March 30, 2022 02:21 |
ICEM to Fluent (2D Geometry): File has wrong dimensions? | mullzer | FLUENT | 2 | December 24, 2021 02:02 |
[Other] 3D geometry exported from Mimics, import to OpenFOAM | seuchsy | OpenFOAM Meshing & Mesh Conversion | 2 | October 5, 2016 09:58 |
[snappyHexMesh] meshing of very small patches in comparison with the overall geometry | christos | OpenFOAM Meshing & Mesh Conversion | 3 | December 17, 2014 17:55 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 04:52 |