[Other] 3D geometry exported from Mimics, import to OpenFOAM

seuchsy · October 4, 2016, 21:57

Hi, I am a beginner. Here is my problem:

I have a series of CT images (a 3D cylinder sample), and I have imported them into Mimics and generated the 3D dimensions. But when I want to import this geometry into OpenFOAM. I get stuck.

Could anyone used geometry exported from Mimics to import into OpenFOAM?

Or is there a good way to import CT images and generate 3D geometry and meshed? I have download "3D slicer". But my CT images did NOT contain the CT information. So I could generated the geometry.

Thanks!

Antimony · October 4, 2016, 23:39

Hi,

I took a look at their website: http://biomedical.materialise.com/mimics

I see that they are able to export the model to STL, which is a format that OpenFOAM uses.

Are you not able to export your model to STL?

Cheers,
Antimony

seuchsy · October 5, 2016, 09:58

Hi, I have export them several models files, "*.msh", "*.stl". I think I will try "*.stl" later, thanks for your suggestions!
Best,
Siyu

October 4, 2016, 21:57	3D geometry exported from Mimics, import to OpenFOAM	#1
seuchsy New Member Siyu Chen Join Date: Sep 2016 Location: Houghton, USA Posts: 7 Rep Power: 11	Hi, I am a beginner. Here is my problem: I have a series of CT images (a 3D cylinder sample), and I have imported them into Mimics and generated the 3D dimensions. But when I want to import this geometry into OpenFOAM. I get stuck. Could anyone used geometry exported from Mimics to import into OpenFOAM? Or is there a good way to import CT images and generate 3D geometry and meshed? I have download "3D slicer". But my CT images did NOT contain the CT information. So I could generated the geometry. Thanks!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] FOAM Warnings leading to no geometry, yet OpenFOAM says meshing finished w/o error	edomalley1	OpenFOAM Meshing & Mesh Conversion	2	October 28, 2024 03:21
Frequently Asked Questions about Installing OpenFOAM	wyldckat	OpenFOAM Installation	3	November 14, 2023 12:58
Suggestion for a new sub-forum at OpenFOAM's Forum	wyldckat	Site Help, Feedback & Discussions	20	October 28, 2014 10:04
[CAD formats] translating geometry from Abaqus to OpenFOAM	skuznet	OpenFOAM Meshing & Mesh Conversion	3	January 10, 2014 14:49
[ICEM] Best way to import geometry ICEM	Cottbus	ANSYS Meshing & Geometry	4	June 12, 2012 10:42

October 4, 2016, 23:39		#2
Antimony Senior Member Join Date: Aug 2013 Posts: 407 Rep Power: 17	Hi, I took a look at their website: http://biomedical.materialise.com/mimics I see that they are able to export the model to STL, which is a format that OpenFOAM uses. Are you not able to export your model to STL? Cheers, Antimony

October 5, 2016, 09:58		#3
seuchsy New Member Siyu Chen Join Date: Sep 2016 Location: Houghton, USA Posts: 7 Rep Power: 11	Hi, I have export them several models files, ".msh", ".stl". I think I will try "*.stl" later, thanks for your suggestions! Best, Siyu