|
[Sponsors] |
[mesh manipulation] polyDualMesh and volume calculation... |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 10, 2009, 13:37 |
polyDualMesh and volume calculation...
|
#1 |
New Member
jb
Join Date: Jun 2009
Posts: 10
Rep Power: 16 |
I have simulated the flow of a liquid that escapes from a container. I used the 'interFoam' solver. I generated the thetrahedral mesh with gmsh, then I converted it with the polyDualMesh utility. The so obtained mesh is funny to use : it increases the calculation speed and reduces the courant number. In my simulation, the liquid flows against a wall and a part of it passes above this wall, and finaly reaches an other container. I have to calculate the volume of liquid that passed above the wall. I thus use the 'integrate variables' filter of paraview in order to integrate the gamma-field in a definite region.
My problem is the following : the 'integrate variables' filter returns an absurd (and negative) volume !!! (but it works well on the initial thetrahedral mesh)... Please, do you know a methods (software), that can calculate the correct volume on this kind of mesh (onbtained with polyDualMesh) ??? Any answer is welcomed... JB |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[mesh manipulation] problem using polyDualMesh | Rebecca513 | OpenFOAM Meshing & Mesh Conversion | 10 | March 4, 2020 12:53 |
polydualmesh and ability to do DNS | manuc | OpenFOAM Pre-Processing | 0 | June 14, 2016 02:22 |
[mesh manipulation] polydualmesh and ability to do DNS | manuc | OpenFOAM Meshing & Mesh Conversion | 1 | June 14, 2016 02:20 |
on volume elements and polyDualMesh | ramcdougal | OpenFOAM Running, Solving & CFD | 2 | February 22, 2012 08:09 |
Problems on Tetrahedra to Polyhedra using polyDualMesh on concave surface object | chnrdu | OpenFOAM Pre-Processing | 2 | July 18, 2009 12:58 |