CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Commercial meshers] problem meshing two interacting volumes

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 14, 2009, 15:59
Question problem meshing two interacting volumes
  #1
New Member
 
banerji
Join Date: Dec 2009
Posts: 22
Rep Power: 16
banerji is on a distinguished road
my case is a pipe passing thourgh a box. I want to model the propagation of radiaton inside the box and model flow in the pipe but i need also propagation of radiation in the pipe. I made a hole into the box that means there is face in contact with the outwall of the pipe. I have a problem merging those two faces hoping to get radiatoion disptribution of radiation into the pipe but have a boundary so that when I model water only inside the pipe. Does any body have an idea? When I tried Fluent only modeled each volume separately I am not getting the radiation to pass though pipe wall even though it is transparent.
banerji is offline   Reply With Quote

Reply

Tags
gambit and fluent

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
3D Cyclone meshing problem Wayne12195 Mesh Generation & Pre-Processing 0 September 25, 2018 01:45
[Gmsh] Vertex numbering is dense KateEisenhower OpenFOAM Meshing & Mesh Conversion 7 August 3, 2015 10:49
[ANSYS Meshing] Inflation - Airfoil Meshing - Divergence problem dalecooper ANSYS Meshing & Geometry 0 July 19, 2013 07:04
[ICEM] Meshing problem in Formula one Far ANSYS Meshing & Geometry 113 April 23, 2013 12:36
[ICEM] problem with meshing in icem cfd saurabhjoshi2011 ANSYS Meshing & Geometry 13 March 12, 2013 11:27


All times are GMT -4. The time now is 14:50.