|
[Sponsors] |
June 20, 2010, 13:20 |
Problems wrinting msh file
|
#1 |
New Member
Join Date: Jun 2010
Posts: 1
Rep Power: 0 |
Hello,
I have my own mesh generator, and want to transfer the mesh to a format OpenFoam can read. I have decided to convert my output to a "msh" format and the use the gmshToFoam utility. I however have some problems : I run a cavity case for testing. The 2d-version seems to work just fine, but when I add more elements to the "depth-direction" OpenFoam will not run. If any out there can give me a hint of where the problem lies, I would be grateful ! The files can be found on : http://www.marin.ntnu.no/tmp/OpenFoam/ Best regards Håvard Holm |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Custom Thermophysical Properties | wsmith02 | OpenFOAM | 4 | June 1, 2023 14:30 |
[swak4Foam] groovyBC in openFOAM-2.0 for parabolic velocity bc | ofslcm | OpenFOAM Community Contributions | 25 | March 6, 2017 10:03 |
[OpenFOAM] Annoying issue of automatic "Rescale to Data Range " with paraFoam/paraview 3.12 | keepfit | ParaView | 60 | September 18, 2013 03:23 |
"parabolicVelocity" in OpenFoam 2.1.0 ? | sawyer86 | OpenFOAM Running, Solving & CFD | 21 | February 7, 2012 11:44 |
OpenFOAM on MinGW crosscompiler hosted on Linux | allenzhao | OpenFOAM Installation | 127 | January 30, 2009 19:08 |