CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] Using a custom blockMesh decomposition with Snappy

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 6, 2011, 11:36
Default Using a custom blockMesh decomposition with Snappy
  #1
New Member
 
Hamish
Join Date: Nov 2010
Location: UK
Posts: 1
Rep Power: 0
snappy is on a distinguished road
Has anyone successfully meshed using a custom decomposed blockMesh?

The custom decomposition works fine but the snappyhexmesh fails with the following for all processors.

Code:
[0] --> FOAM FATAL IO ERROR: 
[0] cannot find file
[0] 
[0] file: /processor0/1/cellDist at line 0.
[0] 
[0]     From function regIOobject::readStream()
[0]     in file db/regIOobject/regIOobjectRead.C at line 73.
[0] 
FOAM parallel run exiting
Copying the cellDist file to the location is of no use as it will simply look for /processor0/2/cellDist instead. I assumed it was a bug but it has not been fixed in the last 3 releases. Does anybody have any solutions?
snappy is offline   Reply With Quote

Reply

Tags
custom, decomposition, snappyhexmesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] can snappy run with multiple block in blockMesh BakedAlmonds OpenFOAM Meshing & Mesh Conversion 9 November 29, 2018 06:30
Reading in Custom Field for Multiple Blocks using blockMesh AustinG OpenFOAM Programming & Development 2 July 5, 2018 18:10
[snappyHexMesh] blockMesh for multi-region snappy kandelabr OpenFOAM Meshing & Mesh Conversion 3 June 12, 2018 05:57
[snappyHexMesh] Snappy extruding my .stl file through my blockMesh abigail_s OpenFOAM Meshing & Mesh Conversion 1 May 24, 2016 21:21
[snappyHexMesh] How to define to right point for locationInMesh Mirage12 OpenFOAM Meshing & Mesh Conversion 7 March 13, 2016 14:07


All times are GMT -4. The time now is 06:17.