[jasxxx]

hi
is it possible to do isolines over a clipped surface, with the actual numbers on the isolines for pressure or velocity magnitude?
thanks
jas

[wyldckat]

Greetings jas,

In ParaView, it's possible, but not easily done. The only two possible solutions I can find are:

1. Coding a Programmable Filter in Python, using this code in C++ as reference: http://www.paraview.org/Wiki/VTK/Exa.../LabelContours
2. Using matplotlib: http://www.kitware.com/blog/home/post/588

But probably the easiest is to export the isolines into a CSV file ("File -> Save Data", if I'm not mistaken) and then plot them elsewhere, such as with gnuplot.

You might also want to ask for this feature at ParaView's bug tracker and/or ParaView's UserVoice:

• http://paraview.org/Bug/
• http://paraview.uservoice.com/
  • EDIT: Actually, this has already been asked for, so make sure to vote there: http://paraview.uservoice.com/forums...-label-contour

Best regards,
Bruno

[wallace]

Hi Bruno,

I hope this doesn't seem to off-topic but this thread is the only hit for "matplotlib in ParaView" on the forum. Have you managed to build ParaView 4.1.0 and use the new matplotlib capabilities?

My installation:
OF23x on SL 6.5 largely following your excellent instructions over on the OpenFOAMWiki. For ParaView, I've set the python (and mesa) option to true in makeParaView4. Prior to build python 2.6.6, numpy 1.4.1 and python-matplotlib 0.99.1.2 were installed via yum. Qt 4.8.5 is built from source. Compiler is clang 3.3.

ParaView builds without error and python scripting features work fine, but if I try to open a "Python View" to do some matplotlib plots, I get the following error:

ERROR: In /home/william/OpenFOAM/ThirdParty-2.3.x/ParaView-4.1.0/ParaViewCore/ClientServerCore/Rendering/vtkMatplotlibUtilities.cxx, line 302
vtkMatplotlibUtilities (0x4940540): Could not call 'dpiCanvas.print_to_buffer()'


Traceback (most recent call last):
  File "<string>", line 1, in <module>
NameError: name 'inf' is not defined
ERROR: In /home/william/OpenFOAM/ThirdParty-2.3.x/ParaView-4.1.0/ParaViewCore/ClientServerCore/Rendering/vtkMatplotlibUtilities.cxx, line 302
vtkMatplotlibUtilities (0x4940540): Could not call 'pythonViewCanvas.print_to_buffer()'

Is some VTK dependency missing perhaps, or some configuration in the ParaView?

[wallace]

Problem solved: removed SL python-matplotlib 0.99.1.2, built and installed matplotlib-1.2.0. (Thanks to Cory Kwammen at Kitware.)

[javier_b]

Hi Jas,

I was looking for a similar solution and I came across your thread.

There is another possibility that hasn't been mentioned here… It is a bit tedious but the results are nice.

1. You need to have first the contour lines.
2. Make a slice over the contour lines you want to label (in order to make points)
3. Select the points you just created.
4. Open the selection inspector and make the label of the points “visible”.
5. You can choose the format of the float number (i.e. %.2f), the color, size etc..

Note: the picture attached uses a constant value just for illustration purposes.

This method has been taken from the following paraview thread:
http://public.kitware.com/pipermail/...er/018798.html

Regards,
Javier

[nanavati]

Originally Posted by javier_b

Hi Jas,

I was looking for a similar solution and I came across your thread.

There is another possibility that hasn't been mentioned here… It is a bit tedious but the results are nice.

1. You need to have first the contour lines.
2. Make a slice over the contour lines you want to label (in order to make points)
3. Select the points you just created.
4. Open the selection inspector and make the label of the points “visible”.
5. You can choose the format of the float number (i.e. %.2f), the color, size etc..

Note: the picture attached uses a constant value just for illustration purposes.

This method has been taken from the following paraview thread:
http://public.kitware.com/pipermail/...er/018798.html

Regards,
Javier

Many thanks for sharing this info. it worked like a charm ! and i found it very easy compared to gnuplot and MATLAB.

[ofbodur]

Hello,

The solution given here assumes that these contours will be steady. I have a simulation in which isotherms change during the model evolution, which means that slices will not fit in the isotherms for other time intervals. Is there any other way just to put the values of isotherms on the lines as we do in MATLAB?

Cheers

Omer