|
[Sponsors] |
chtMultiRegionSimpleFoam tutorial heatexchanger |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 21, 2013, 01:57 |
chtMultiRegionSimpleFoam tutorial heatexchanger
|
#1 |
New Member
ande
Join Date: Oct 2013
Posts: 18
Rep Power: 12 |
Hi everbody,
iam a student working on my masterthesis and iam new to OpenFOAM. I want to simulate a heat exchanger with porous media. For the beginning I ran the tutorial heat exchanger without any modifications. I supposed it worked very well, but the region "air" didnīt warm up. It has still the start temperature of 300K. Iam using openFOAM 2.2.1. Did someone else try to run this tutorial? And what are the results? Thanks in advance. |
|
December 19, 2013, 11:11 |
|
#2 |
New Member
Pam
Join Date: Feb 2011
Posts: 15
Rep Power: 15 |
Check the initial boundary conditions for air in the standard tutorial. Check the velocity and temperature for air in "0" folder.
__________________
Pam Last edited by prameelar; December 19, 2013 at 12:14. |
|
Tags |
heat exchanger, porous media, tutorial |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tutorial for subcooled nucleate boiling | Asghari | FLUENT | 42 | December 10, 2018 11:42 |
Problem on Fluent Tutorial: Horizontal Film Boilig | Feng | FLUENT | 2 | April 13, 2013 05:34 |
[Virtualization] OpenFOAM oriented tutorial on using VMware Player - support thread | wyldckat | OpenFOAM Installation | 2 | July 11, 2012 16:01 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
STAR-CD Tutorial | shekhar aryal | STAR-CD | 4 | March 22, 2010 03:25 |