CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

concave faces and Ggi

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 14, 2016, 06:18
Default concave faces and Ggi
  #1
New Member
 
Amelie Rohlfs
Join Date: Jan 2013
Posts: 19
Rep Power: 6
AmRo is on a distinguished road
Hello,

there used to be the problem, that a Ggi can't handle concave faces which often occure when meshing with snappyHexMesh.
Martin Beaudoin said in this thread http://www.cfd-online.com/Forums/ope...tml#post267025 in 2010 that this issue will be solved soon.

Does anybody have some current information on this topic?

Cheers,
Amelie
AmRo is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Create a GeometricField of a given type on given patch? philippose OpenFOAM Programming & Development 4 August 12, 2013 12:41
reconstructPar failed with OF16ext and GGI A.Wendy OpenFOAM Post-Processing 0 September 13, 2012 01:45
GGI and Topological changes - checkMesh fails strakakl OpenFOAM Programming & Development 3 June 20, 2012 05:30
ggi and "uncovered faces found" aqua OpenFOAM Running, Solving & CFD 0 January 25, 2012 07:02
GGI in OpenFOAM-1.5-dev philippose OpenFOAM Running, Solving & CFD 14 November 13, 2011 15:55


All times are GMT -4. The time now is 02:42.