|
[Sponsors] |
February 28, 2020, 14:14 |
sonic patch for nozzel inlet
|
#1 |
Member
Patti Michelle Sheaffer
Join Date: Sep 2018
Posts: 55
Rep Power: 7 |
Hello: I'm simulating a air nozzle that is sonic and fixed temperature at the tip, exhausting into still air. I'm not sure what the most appropriate patch type for this inlet is. Can anyone suggest a tutorial or patch-type or relevant thread on this forum? I'm also pretty sure the outlet(s) have to be zeroGradient" for numerical stability.
Thank You Very Much, PattiM |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Other] Wedge patch '*' is not planar | LilumDaru | OpenFOAM Meshing & Mesh Conversion | 6 | January 12, 2021 05:55 |
[Commercial meshers] Fluent3DMeshToFoam | simvun | OpenFOAM Meshing & Mesh Conversion | 50 | January 19, 2020 15:33 |
[Commercial meshers] Mesh conversion problem (fluent3DMeshToFoam) | Aadhavan | OpenFOAM Meshing & Mesh Conversion | 2 | March 8, 2018 01:47 |
[GAMBIT] periodic faces not matching | Aadhavan | ANSYS Meshing & Geometry | 6 | August 31, 2013 11:25 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |