|
[Sponsors] |
How to calculate R and B for Turbulencemodels |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 24, 2009, 12:27 |
How to calculate R and B for Turbulencemodels
|
#1 |
Member
Sebastian
Join Date: Mar 2009
Location: Munich, Germany
Posts: 30
Rep Power: 17 |
Hi every one,
i've implemented a simple wedge-geometry with three inlets and two outlets. Now i want to compare the following kinds of turbulence-techniques: k-epsilon, k-OmegaSST, Spalart-Allmaras, Launder Gibson RSTM and LES with two different LES-Filters. Solvers are rhoTurbFoam for RANS and coodles for LES. For k-epsilon and k-omegaSST i found a lot of literature and some information about calulating k and epsilon. But the other models bringind up a lot of questions: 1. For Launder-Gibson i have to set a R-field. I've found information about the model, but nothing about to calulate or find values for the R-field. How can I proceed? 2. Spalart-Allmaras wants to have a mut-field. I know, that mut is nut mutliplied with the density. I have no information about the density. Same question as above: how can i set the field-file? 3. Same procedure for LES: B-field and and muSGS. I know that's too much for some simple tips. But perhaps someone can give me some useful information! Thanx for reading Sebastian |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to calculate Torque for francis turbine | manish | CFX | 4 | March 15, 2007 02:57 |
How to calculate the cell area | Le | FLUENT | 0 | February 18, 2007 22:15 |
How to calculate energy dissipation | chinthakindi | Main CFD Forum | 0 | February 23, 2004 06:36 |
can use coupled solver to calculate combustion | cfdfans | FLUENT | 0 | November 25, 2003 04:48 |
How to calculate density of solid phase | zhou | Main CFD Forum | 0 | December 17, 1999 19:06 |