|July 10, 2015, 04:22||
Assignment of different variables in porous media
Join Date: Jul 2015
Posts: 42Rep Power: 3
I am new to openFoam. Let me explain my problem first. I am simulating a 2D case with a rectangular mesh which has a circular shape within it . All the control volume is a porous media . Its basically a body tissue and circular shape is a tumor within the tissue. now the circle that is tumor and outside circle i.e skin have different values of variables i.e hydraulic conductivity,vascular pressure etc. these variables has been assigned by me in Peqn .H file as source and sink terms. My doubts are:
1. I basically is solving continuity eqn in porous media solver with some source and sink terms. Can i solve this eqn for different parts i.e tumor and skin with different values of the constants involved in it once at a time. If yes please tell how to do it .I have assigned all the variables in transport properties. I am also attaching my peqn .H file of porous solver in that source and sink terms are highlighted these have different values for tumor and normal tissue i.e skin.
2. These constant values are given in transport properties for tumor which i am attaching . i want to know how can i give normal tissue values also there and then run the code simultaneously for tumor and normal tissue.
please help i shall be highly thankful......
|Thread||Thread Starter||Forum||Replies||Last Post|
|Porous media setup issues in Fluent||Bernard Van||FLUENT||29||January 26, 2017 05:09|
|How to model granular flow through porous media||Axius||FLUENT||2||August 7, 2014 10:34|
|Multiphase Porous Media Flow - Convergence Issues||VT_Bromley||FLUENT||5||March 23, 2011 11:38|
|access to variables at interface of porous media?||Mazyar||FLUENT||0||October 10, 2003 14:59|
|porous media: Fluent or Star-CD?||Igor||Main CFD Forum||0||December 5, 2002 16:16|