How to implement kOmega turbulent model in to DPMFoam

amilachandra · July 22, 2015, 06:39

Hi All,

I am new to OpenFaom. I have to model pneumatic conveyor. KOmega turbulence model is the most suitable model for my application (I cant get good result from kEpsilent). but I cant use KOmega with DPMFoam. Please any one know how to implement KOmega in to DPM Foam

kinbean · July 18, 2017, 08:31

Did you get an answer to this? I would also like to know

chpjz0391 · September 12, 2017, 10:23

Did you get the answer? how to set the fvSchemes?

sharonyue · October 22, 2018, 23:48

Put the following to the DPMTurbulenceModels.C, then wmake libso. Works fine

#include "kOmega.H"
makeRASModel(kOmega);

July 22, 2015, 06:39	How to implement kOmega turbulent model in to DPMFoam	#1
amilachandra New Member Amila C Kahawalage Join Date: Jun 2015 Posts: 9 Rep Power: 12	Hi All, I am new to OpenFaom. I have to model pneumatic conveyor. KOmega turbulence model is the most suitable model for my application (I cant get good result from kEpsilent). but I cant use KOmega with DPMFoam. Please any one know how to implement KOmega in to DPM Foam abdollahi likes this.

October 22, 2018, 23:48		#4
sharonyue Senior Member Dongyue Li Join Date: Jun 2012 Location: Beijing, China Posts: 866 Rep Power: 19	Put the following to the DPMTurbulenceModels.C, then wmake libso. Works fine #include "kOmega.H" makeRASModel(kOmega); amilachandra and Ramzy1990 like this. __________________ My OpenFOAM algorithm website: http://dyfluid.com By far the largest Chinese CFD-based forum: http://www.cfd-china.com/category/6/openfoam We provide lots of clusters to Chinese customers, and we are considering to do business overseas: http://dyfluid.com/DMCmodel.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k-omega-SST model (OF 1.6) - turbulent flat plate	cboss	OpenFOAM Running, Solving & CFD	25	August 9, 2016 10:53
porous media turbulent model P-dL, I get the different results? is the model wrong?	hitchenxue	FLUENT	0	July 13, 2014 06:57
Use of laminar model for a turbulent flow	jcamilleri	Main CFD Forum	1	July 6, 2014 07:54
Error - simplefoam when running turbulent model	twoofspade	OpenFOAM Running, Solving & CFD	4	December 17, 2013 08:32
k-w turbulent model and inflow boundary conditions	vaina74	Main CFD Forum	6	April 26, 2010 07:03

July 18, 2017, 08:31		#2
kinbean New Member Join Date: Jun 2017 Posts: 11 Rep Power: 10	Did you get an answer to this? I would also like to know

September 12, 2017, 10:23		#3
chpjz0391 Member Ping Chang Join Date: Feb 2016 Location: Perth Posts: 93 Rep Power: 11	Did you get the answer? how to set the fvSchemes?