Upgrading a solver from OF 1.7.1 to OF 2.3.0

ehsan_am86 · January 19, 2016, 21:18

Hi Dear Foamers,

In fact, I have a solver which has been written based on OpenFOAM 1.7.1 and I want to upgrade that into OpenFOAM 2.3.

Could you please give me some advises how I could start to change?

It is possible for a person who is not professional in developing OpenFOAM solvers?

I would be appreciated if somebody give me some recommendations.

blais.bruno · January 20, 2016, 09:08

My suggestion would be to look for a similar solver in OpenFOAM 2.3 and see which part have changed.

Most likely, some of the included libraries have changed and some member function calls (most likely within the pressure corrector loop) have change. It is doable, but it really depends on the complexity of what was done within the solver.

If you can post the solver maybe others can give you a hand.

Cheers and good luck.

Quote:

Originally Posted by ehsan_am86

Hi Dear Foamers,

In fact, I have a solver which has been written based on OpenFOAM 1.7.1 and I want to upgrade that into OpenFOAM 2.3.

Could you please give me some advises how I could start to change?

It is possible for a person who is not professional in developing OpenFOAM solvers?

I would be appreciated if somebody give me some recommendations.

ehsan_am86 · January 20, 2016, 13:28

Thanks for your suggestion.

In fact, my solver is twoPhaseEulerFoam which has been coupled with population balance.

If I understood correctly, you meant I can compare twoPhaseEulerFoam in OF 1.7.1 with twoPhaseEulerFoam in OF 2.3.0? And then, I will be able to upgrade my costume solver (twoPhaseEulerFoam+population balance) to O.F 2.3.0 one?

However, my view is this fact that I could compare the costume solver with standard solver in O.F 1.7.1 and then, moving forward into O.F 2.3.0?

I would be appreciated if you let me know your comment.

January 19, 2016, 21:18	Upgrading a solver from OF 1.7.1 to OF 2.3.0	#1
ehsan_am86 New Member Ehsan Join Date: Aug 2010 Location: QC, Canada Posts: 29 Rep Power: 15	Hi Dear Foamers, In fact, I have a solver which has been written based on OpenFOAM 1.7.1 and I want to upgrade that into OpenFOAM 2.3. Could you please give me some advises how I could start to change? It is possible for a person who is not professional in developing OpenFOAM solvers? I would be appreciated if somebody give me some recommendations.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
solver for evaporation/condensation modeling	gaza	OpenFOAM Programming & Development	33	February 11, 2021 10:19
thobois class engineTopoChangerMesh error	Peter_600	OpenFOAM	4	August 2, 2014 09:52
3d vof	Smaras	FLUENT	2	February 19, 2013 06:58
why the solver reject it? Anyone with experience?	bearcat	CFX	6	April 28, 2008 14:08
Error during Solver	cfd guy	CFX	4	May 8, 2001 06:04

January 20, 2016, 13:28		#3
ehsan_am86 New Member Ehsan Join Date: Aug 2010 Location: QC, Canada Posts: 29 Rep Power: 15	Thanks for your suggestion. In fact, my solver is twoPhaseEulerFoam which has been coupled with population balance. If I understood correctly, you meant I can compare twoPhaseEulerFoam in OF 1.7.1 with twoPhaseEulerFoam in OF 2.3.0? And then, I will be able to upgrade my costume solver (twoPhaseEulerFoam+population balance) to O.F 2.3.0 one? However, my view is this fact that I could compare the costume solver with standard solver in O.F 1.7.1 and then, moving forward into O.F 2.3.0? I would be appreciated if you let me know your comment.