Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Programming & Development

adjoint based optimization of turbulence models

Mark Forums Read

Like Tree

1Likes

1 Post By rvl565

Reply

Search this Thread

April 12, 2016, 17:07	adjoint based optimization of turbulence models	#1
rvl565 Member RacMat Join Date: Jan 2013 Posts: 78 Rep Power: 15	Hi, Has anyone tried modifying and using adjointShapeOptimizationFoam to optimize turbulence models? Following is the reference: http://arc.aiaa.org/doi/pdf/10.2514/6.2015-1284 page 3 has 6 have the relevant equations. If not can anyone advise on how I should proceeded in implementing the above procedure in OpenFOAM. Thanks! fumiya likes this.

Reply

Tags

adjoint, inverse modeling, optimization, rans, turbulence models

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Use of two different turbulence models at the same simulation	agustinvo	OpenFOAM Running, Solving & CFD	5	April 6, 2025 10:48
the differences between turbulence models	agungwp	FLUENT	6	July 1, 2018 04:02
Turbulence models	Reza Imani	Main CFD Forum	7	April 8, 2016 10:15
variety of turbulence models in cfx?	hamidciv	CFX	5	January 4, 2016 03:41
hard to convergent with SU2 4.0 for Euler adjoint	Xianguu	SU2	1	July 14, 2015 18:09

All times are GMT -4. The time now is 23:53.