Omega.correctBoundaryConditions() changes the internal field values?

ripperjack · January 25, 2017, 11:05

Hi guys,

I am developing my own solver based on simpleFoam with the kOmegaSST model and wall functions. I notice that if I call omega.correctBoundaryConditions(), the omega internal field value (cells right next to the walls) will be changed. This is not the case for nut or k.

From my understanding, if wall function is used, the correctBoundaryConditions call will only update the wall face value. The cell values in the internal field shouldn't be changed. This behavior for omega is rather confusing... Any ideas? Thanks very much in advance!

Best regards,
Ping

ripperjack · January 25, 2017, 11:09

BTW: I am using version 2.3.0

ripperjack · January 26, 2017, 10:55

For those who are interested in this topic, the answer is here.

January 25, 2017, 11:05	Omega.correctBoundaryConditions() changes the internal field values?	#1
ripperjack Member Jack Join Date: Dec 2011 Posts: 94 Rep Power: 14	Hi guys, I am developing my own solver based on simpleFoam with the kOmegaSST model and wall functions. I notice that if I call omega.correctBoundaryConditions(), the omega internal field value (cells right next to the walls) will be changed. This is not the case for nut or k. From my understanding, if wall function is used, the correctBoundaryConditions call will only update the wall face value. The cell values in the internal field shouldn't be changed. This behavior for omega is rather confusing... Any ideas? Thanks very much in advance! Best regards, Ping

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TimeVaryingMappedFixedValue	irishdave	OpenFOAM Running, Solving & CFD	32	June 16, 2021 06:55
Reading values of internal faces	sega	OpenFOAM Post-Processing	6	August 29, 2017 21:09
[mesh manipulation] Importing Multiple Meshes	thomasnwalshiii	OpenFOAM Meshing & Mesh Conversion	18	December 19, 2015 18:57
internal Field BC	T.D.	OpenFOAM	5	March 14, 2011 04:48
Problem with rhoSimpleFoam	matteo_gautero	OpenFOAM Running, Solving & CFD	0	February 28, 2008 06:51

January 25, 2017, 11:09		#2
ripperjack Member Jack Join Date: Dec 2011 Posts: 94 Rep Power: 14	BTW: I am using version 2.3.0

January 26, 2017, 10:55		#3
ripperjack Member Jack Join Date: Dec 2011 Posts: 94 Rep Power: 14	For those who are interested in this topic, the answer is here.