|
[Sponsors] |
Trying to create a new solver: phaseChangeHeatDyMFoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
March 15, 2018, 02:27 |
Trying to create a new solver: phaseChangeHeatDyMFoam
|
#1 |
Member
L S
Join Date: Apr 2016
Posts: 63
Rep Power: 10 |
I am trying to incorporate dynamic meshing with phaseChangeHeatFoam solver. The new solver is compiled by copying and imitating the files of interDyMFoam and interFoam. I made a new solver called phaseChangeHeatDyMFoam.
But, while running a test code i get this error: #0 Foam::error:rintStack(Foam::Ostream&) at ??:? #1 Foam::sigFpe::sigHandler(int) at ??:? #2 in "/lib/x86_64-linux-gnu/libc.so.6" #3 Foam::tmp<Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> > Foam::mag<Foam::Vector<double>, Foam::fvsPatchField, Foam::surfaceMesh>(Foam::GeometricField<Foam::Vect or<double>, Foam::fvsPatchField, Foam::surfaceMesh> const&) at ??:? #4 Foam::smoothInterfaceProperties::calculateK() at ??:? #5 at ??:? #6 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #7 at ??:? Floating point exception (core dumped) What can i to solve the problem. Here is my boundary conditions folder: https://drive.google.com/drive/folde...gX?usp=sharing |
|
March 17, 2018, 16:52 |
|
#2 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Quick question: Have you confirmed if the case runs with interDyMFoam or pimpleDyMFoam?
Because that's the first thing you should do, namely to have a case with which you can compare apples with apples, otherwise you are risking trying to solve 2 to 10 problems at the same time. The only guaranteed way to figure out how to solve each problem is if you are able to isolate each problem. And in this case, you need to first test if the case even works with the other solvers. On the other hand, if you have already tested the case with the two other solvers and it worked, then you should have written indicating that as well.
__________________
|
|
March 19, 2018, 10:10 |
|
#3 |
Member
L S
Join Date: Apr 2016
Posts: 63
Rep Power: 10 |
Hi,
I have tested a case by running it with interDyMFoam, where it works fine. But, It do not work in phaseChangeHeatDyMFoam. |
|
March 20, 2018, 08:33 |
Debug using gdb
|
#4 | |||
New Member
Saicharan
Join Date: Jan 2018
Location: Bangalore, India
Posts: 29
Rep Power: 8 |
Go to your solver's directory, type this in the terminal:
Quote:
Quote:
Quote:
|
||||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Can't get data from OpenFoam to external solver using externalCoupled | perry | OpenFOAM Running, Solving & CFD | 4 | May 26, 2014 08:09 |
Quarter Burner mesh with periosic condition | SamCanuck | FLUENT | 2 | August 31, 2011 11:34 |
Working directory via command line | Luiz | CFX | 4 | March 6, 2011 20:02 |
how to combine parts of MRFSimpleFoam and TurbFoam to create a new solver? | renyun0511 | OpenFOAM Running, Solving & CFD | 0 | May 3, 2010 22:10 |
why the solver reject it? Anyone with experience? | bearcat | CFX | 6 | April 28, 2008 14:08 |