Model evaporation of solution

zjuliu · March 2, 2024, 11:31

Is there a solver or similar solver that can model the transfer of one phase of liquid to another phase, while also allowing for the solution of concentration profiles within the phases.

Like the evaporation of the water in brine improves the concentration of the salt

Severus · March 19, 2024, 10:43

Hello,
If you are using the ESI release (any version) or Foundation release (version 7 or lower),
You can take a look at the Euler-Euler solvers such as reactingTwoPhaseEulerFoam or reactingMultiphaseEulerFoam.
Also, in ESI release you have the VOF solver such as interCondensatingEvaporatingFoam.

If you are using Foundation release (version 8, 9 or 10),
You can take a look at Euler-Euler solver such as multiphaseEulerFoam.

Thanks

zjuliu · March 23, 2024, 18:43

Thanks a lot for your valuable help! I will take a look.

March 2, 2024, 11:31	Model evaporation of solution	#1
zjuliu New Member Liu Yajing Join Date: Apr 2022 Posts: 4 Rep Power: 4	Is there a solver or similar solver that can model the transfer of one phase of liquid to another phase, while also allowing for the solution of concentration profiles within the phases. Like the evaporation of the water in brine improves the concentration of the salt

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Evaporation of water bridge : Which Model Should I Use ?	ddr2007	Fluent Multiphase	0	January 19, 2024 05:34
Evaporation of Liquid Bridge: Which Model Should I Use ?	ddr2007	FLUENT	0	January 13, 2024 05:23
Does the Lee model for evaporation guarantee a correct total evaporation volume?	lzhaok6	Main CFD Forum	0	March 16, 2023 03:30
Solidification and evaporation model.	Mohamed Mousa	Fluent Multiphase	1	September 20, 2019 06:48
Evaporation and condensation Model in Fluent	amy24d	Fluent Multiphase	5	May 26, 2015 12:20

March 19, 2024, 10:43		#2
Severus Member Shravan Join Date: Mar 2017 Posts: 60 Rep Power: 9	Hello, If you are using the ESI release (any version) or Foundation release (version 7 or lower), You can take a look at the Euler-Euler solvers such as reactingTwoPhaseEulerFoam or reactingMultiphaseEulerFoam. Also, in ESI release you have the VOF solver such as interCondensatingEvaporatingFoam. If you are using Foundation release (version 8, 9 or 10), You can take a look at Euler-Euler solver such as multiphaseEulerFoam. Thanks

March 23, 2024, 18:43		#3
zjuliu New Member Liu Yajing Join Date: Apr 2022 Posts: 4 Rep Power: 4	Thanks a lot for your valuable help! I will take a look.