chtMultiRegionSimpleFoam: strange error

samiam1000 · October 9, 2013, 10:22

Dear all,

trying to run my chtMultiRegionSimpleFoam simulation, I get this error:

Code:

/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.2.1                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 2.2.1-57f3c3617a2d
Exec   : chtMultiRegionSimpleFoam
Date   : Oct 09 2013
Time   : 16:09:54
Host   : "lab-laptop"
PID    : 7471
Case   : /home/lab/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Disallowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create fluid mesh for region fluid for time = 0

Create solid mesh for region domain1 for time = 0

Create solid mesh for region domain2 for time = 0

Create solid mesh for region domain3 for time = 0



--> FOAM FATAL IO ERROR: 
keyword type is undefined in dictionary ".T"

file: .T from line 49 to line 66.

    From function dictionary::lookupEntry(const word&, bool, bool) const
    in file db/dictionary/dictionary.C at line 402.

FOAM exiting

lab@lab-laptop:~/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady$

The point is that it does not suggest me which is the corrupted file. Any idea? Is the error supposed to be in the domain3 region? Or domain3 is ok and I have to look in the next ones?

Thanks a lot,
Samuele

wyldckat · October 12, 2013, 15:16

Hi Samuele,

Try this:

Code:

find . -name ".T"

It will tell you where the files named ".T" are located.

By the way, on Linux, files that start with "." are usually considered as hidden files. To see then, use the "-a" option with "ls" or "ll", for examples:

Code:

ls -a
ll -a
ls -la

The two last ones should be the same, because "ll" is an alias (when defined as such), as proved by this command:

Code:

alias ll

Best regards,
Bruno

samiam1000 · October 14, 2013, 04:04

I Bruno,

the point is that there was not such a file :-/..

..I've changed the folder case name and not I don't have this error.

But I have this new one:

Code:

lab@lab-laptop:~/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady$ chtMultiRegionSimpleFoam 
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.2.1                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 2.2.1-57f3c3617a2d
Exec   : chtMultiRegionSimpleFoam
Date   : Oct 14 2013
Time   : 08:55:57
Host   : "lab-laptop"
PID    : 2667
Case   : /home/lab/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Disallowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create fluid mesh for region fluid for time = 0

Create solid mesh for region domain1 for time = 0

Create solid mesh for region domain2 for time = 0

Create solid mesh for region domain3 for time = 0

Create solid mesh for region domain5 for time = 0

Create solid mesh for region packs for time = 0

*** Reading fluid mesh thermophysical properties for region fluid

    Adding to thermoFluid

Selecting thermodynamics package heRhoThermo<pureMixture<const<hConst<perfectGas<specie>>,sensibleEnthalpy>>>
#0  Foam::error::printStack(Foam::Ostream&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#1  Foam::sigFpe::sigHandler(int) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#2   in "/lib/x86_64-linux-gnu/libc.so.6"
#3  Foam::heRhoThermo<Foam::rhoThermo, Foam::pureMixture<Foam::constTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate() in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
#4  Foam::rhoThermo::addfvMeshConstructorToTable<Foam::heRhoThermo<Foam::rhoThermo, Foam::pureMixture<Foam::constTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > > >::New(Foam::fvMesh const&, Foam::word const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
#5  Foam::autoPtr<Foam::rhoThermo> Foam::basicThermo::New<Foam::rhoThermo>(Foam::fvMesh const&, Foam::word const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
#6  Foam::rhoThermo::New(Foam::fvMesh const&, Foam::word const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
#7  
 in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
#8  __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6"
#9  
 in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
Floating point exception (core dumped)
lab@lab-laptop:~/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady$ 
lab@lab-laptop:~/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady$ 
lab@lab-laptop:~/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady$ 
lab@lab-laptop:~/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady$

Could you help?

Thanks a lot,
Samuele

Tobi · October 14, 2013, 06:38

Hi Samuel,

the first error is nice - never seen that befor.

The last error "Floating Point exeption" occure if you are dividing by Zero.

Check all your BC and set always the "value uniform X" keyword.

But hmmm ... it seems that you get the error while updating the thermodynamics. Maybe when the constructor is selected.

But first check my first hint.
Your meshes are okay?
Boundary files okay too?

Regards
Tobi

samiam1000 · October 14, 2013, 07:49

Dear Tobi,

thanks for answering. Well, let me have a look at all the BC. Anyway, I am pretty confident it is ok! As far as the mesh is concerned, it should be alright.

I'll give you a feedback, soon.

Thanks a lot,
Samuele

samiam1000 · October 21, 2013, 05:39

Dear Tobi,

I have checked all the BC and I have done some modifications.

The point is that now I have done a small step ahead, but there still is something wrong:

Code:

/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.2.1                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 2.2.1-57f3c3617a2d
Exec   : chtMultiRegionSimpleFoam
Date   : Oct 21 2013
Time   : 11:26:34
Host   : "lab-laptop"
PID    : 4069
Case   : /home/lab/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Disallowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create fluid mesh for region fluid for time = 0

Create solid mesh for region domain1 for time = 0

Create solid mesh for region domain2 for time = 0

Create solid mesh for region domain3 for time = 0

Create solid mesh for region domain5 for time = 0

Create solid mesh for region packs for time = 0

*** Reading fluid mesh thermophysical properties for region fluid

    Adding to thermoFluid

Selecting thermodynamics package 
{
    type            heRhoThermo;
    mixture         pureMixture;
    transport       const;
    thermo          hConst;
    equationOfState perfectGas;
    specie          specie;
    energy          sensibleEnthalpy;
}

    Adding to rhoFluid

    Adding to UFluid

    Adding to phiFluid

    Adding to gFluid

    Adding to turbulence

Selecting turbulence model type RASModel
Selecting RAS turbulence model kEpsilon
--> Upgrading k to employ run-time selectable wall functions
    Backup original k to k.old
    Writing updated k
--> Upgrading epsilon to employ run-time selectable wall functions
    Backup original epsilon to epsilon.old
    Writing updated epsilon
--> Creating mut to employ run-time selectable wall functions
    Writing new mut
--> Creating alphat to employ run-time selectable wall functions
    Writing new alphat
kEpsilonCoeffs
{
    Cmu             0.09;
    C1              1.44;
    C2              1.92;
    C3              -0.33;
    sigmak          1;
    sigmaEps        1.3;
    Prt             1;
}

    Adding to ghFluid

    Adding to ghfFluid

--> FOAM Warning : 
    From function Field<Type>::Field(const word& keyword, const dictionary&, const label)
    in file /home/opencfd/OpenFOAM/OpenFOAM-2.2.1/src/OpenFOAM/lnInclude/Field.C at line 262
    Reading "/home/lab/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady/0/fluid/p_rgh" from line 18 to line 20
    expected keyword 'uniform' or 'nonuniform', assuming deprecated Field format from Foam version 2.0.
--> FOAM Warning : 
    From function Field<Type>::Field(const word& keyword, const dictionary&, const label)
    in file /home/opencfd/OpenFOAM/OpenFOAM-2.2.1/src/OpenFOAM/lnInclude/Field.C at line 262
    Reading "/home/lab/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady/0/fluid/p_rgh.boundaryField.intake" from line 55 to line 20
    expected keyword 'uniform' or 'nonuniform', assuming deprecated Field format from Foam version 2.0.
Selecting radiationModel none
    Adding fvOptions

No finite volume options present

*** Reading solid mesh thermophysical properties for region domain1

    Adding to thermos

Selecting thermodynamics package 
{
    type            heSolidThermo;
    mixture         pureMixture;
    transport       constIso;
    thermo          hConst;
    equationOfState rhoConst;
    specie          specie;
    energy          sensibleEnthalpy;
}

    Adding to radiations

Radiation model not active: radiationProperties not found
Selecting radiationModel none
    Adding fvOptions

No finite volume options present

*** Reading solid mesh thermophysical properties for region domain2

    Adding to thermos

Selecting thermodynamics package 
{
    type            heSolidThermo;
    mixture         pureMixture;
    transport       constIso;
    thermo          hConst;
    equationOfState rhoConst;
    specie          specie;
    energy          sensibleEnthalpy;
}

    Adding to radiations

Radiation model not active: radiationProperties not found
Selecting radiationModel none
    Adding fvOptions

No finite volume options present

*** Reading solid mesh thermophysical properties for region domain3

    Adding to thermos

Selecting thermodynamics package 
{
    type            heSolidThermo;
    mixture         pureMixture;
    transport       constIso;
    thermo          hConst;
    equationOfState rhoConst;
    specie          specie;
    energy          sensibleEnthalpy;
}

    Adding to radiations

Radiation model not active: radiationProperties not found
Selecting radiationModel none
    Adding fvOptions

No finite volume options present

*** Reading solid mesh thermophysical properties for region domain5

    Adding to thermos

Selecting thermodynamics package 
{
    type            heSolidThermo;
    mixture         pureMixture;
    transport       constIso;
    thermo          hConst;
    equationOfState rhoConst;
    specie          specie;
    energy          sensibleEnthalpy;
}

#0  Foam::error::printStack(Foam::Ostream&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#1  Foam::sigSegv::sigHandler(int) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#2   in "/lib/x86_64-linux-gnu/libc.so.6"
#3  Foam::tmp<Foam::Field<double> > Foam::fvPatch::patchInternalField<double>(Foam::UList<double> const&) const in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
#4  Foam::fvPatchField<double>::patchInternalField() const in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
#5  Foam::basicSymmetryFvPatchField<double>::evaluate(Foam::UPstream::commsTypes) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libfiniteVolume.so"
#6  Foam::symmetryFvPatchField<double>::symmetryFvPatchField(Foam::fvPatch const&, Foam::DimensionedField<double, Foam::volMesh> const&, Foam::dictionary const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libfiniteVolume.so"
#7  Foam::fvPatchField<double>::adddictionaryConstructorToTable<Foam::symmetryFvPatchField<double> >::New(Foam::fvPatch const&, Foam::DimensionedField<double, Foam::volMesh> const&, Foam::dictionary const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libfiniteVolume.so"
#8  Foam::fvPatchField<double>::New(Foam::fvPatch const&, Foam::DimensionedField<double, Foam::volMesh> const&, Foam::dictionary const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
#9  Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>::GeometricBoundaryField::readField(Foam::DimensionedField<double, Foam::volMesh> const&, Foam::dictionary const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
#10  Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>::readFields(Foam::dictionary const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
#11  Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>::readFields() in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
#12   at basicThermo.C:0
#13  Foam::basicThermo::lookupOrConstruct(Foam::fvMesh const&, char const*) const in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
#14  Foam::basicThermo::basicThermo(Foam::fvMesh const&, Foam::word const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
#15  Foam::solidThermo::solidThermo(Foam::fvMesh const&, Foam::word const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libsolidThermo.so"
#16  Foam::heThermo<Foam::solidThermo, Foam::pureMixture<Foam::constIsoSolidTransport<Foam::species::thermo<Foam::hConstThermo<Foam::rhoConst<Foam::specie> >, Foam::sensibleEnthalpy> > > >::heThermo(Foam::fvMesh const&, Foam::word const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libsolidThermo.so"
#17  Foam::solidThermo::addfvMeshConstructorToTable<Foam::heSolidThermo<Foam::solidThermo, Foam::pureMixture<Foam::constIsoSolidTransport<Foam::species::thermo<Foam::hConstThermo<Foam::rhoConst<Foam::specie> >, Foam::sensibleEnthalpy> > > > >::New(Foam::fvMesh const&, Foam::word const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libsolidThermo.so"
#18  Foam::autoPtr<Foam::solidThermo> Foam::basicThermo::New<Foam::solidThermo>(Foam::fvMesh const&, Foam::word const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libsolidThermo.so"
#19  Foam::solidThermo::New(Foam::fvMesh const&, Foam::word const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libsolidThermo.so"
#20  
 in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
#21  __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6"
#22  
 in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
Segmentation fault (core dumped)

Any idea about this `new' (for me) error?

Tobi · October 21, 2013, 06:28

Hi,

first of all post the p_rgh file (0/fluid/p_rgh).
And the second error (Segmentation fault) is in your domain5. You have an error there.

samiam1000 · October 21, 2013, 06:47

Thanks Tobi.

Here is my p_rgh file:

Code:

/*--------------------------------*- C++ -*----------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.2.1                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
FoamFile
{
    version     2.0;
    format      ascii;
    class       volScalarField;
    location    "0";
    object      p_rgh;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

dimensions      [ 1 -1 -2 0 0 0 0 ];

internalField   100000;

boundaryField
{
    wall-fluid
    {
        type            buoyantPressure;
        value           $internalField;
    }
    back
    {
        type            buoyantPressure;
        value           $internalField;
    }
    empty_1
    {
        type            buoyantPressure;
        value           $internalField;
    }
    empty_2-fluid
    {
        type            symmetryPlane;
    }
    glass
    {
        type            buoyantPressure;
        value           $internalField;
    }
    inlet_main
    {
        type            buoyantPressure;
        value           $internalField;
    }
    intake
    {
        type            fixedValue;
        value           $internalField;
    }
    pcm_surface
    {
        type            buoyantPressure;
        value           $internalField;
    }
    fluid_to_domain5
    {
        type            buoyantPressure;
        value           $internalField;
    }
    fluid_to_domain3
    {
        type            buoyantPressure;
        value           $internalField;
    }
    fluid_to_domain1
    {
        type            buoyantPressure;
        value           $internalField;
    }
    fluid_to_packs
    {
        type            buoyantPressure;
        value           $internalField;
    }
    fluid_to_domain2
    {
        type            buoyantPressure;
        value           $internalField;
    }
}


// ************************************************************************* //

and here the domain5 changeLogDict:

Code:

/*--------------------------------*- C++ -*----------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.1.0                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
FoamFile
{
    version     2.0;
    format      ascii;
    class       dictionary;
    object      changeDictionaryDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

dictionaryReplacement
{
    boundary
    {
        empty_2-packs
        {
            type            symmetryPlane;
            nFaces          1342;
            startFace       47303;
        }
        wall_packs
        {
            type            wall;
            nFaces          705;
            startFace       48645;
        }
        domain5_to_fluid
        {
            type            mappedWall;
            nFaces          3997;
            startFace       49350;
            sampleMode      nearestPatchFace;
            sampleRegion    fluid;
            samplePatch     fluid_to_domain1;
            offsetMode      uniform;
            offset          (0 0 0);
        }
    }

    T
    {
        internalField   uniform 298;

        boundaryField
        {
            empty_2-packs
            {
                type            symmetryPlane;
            }
            wall_packs
            {
                type            zeroGradient;
            }
            domain5_to_fluid
            {
                type            compressible::turbulentTemperatureCoupledBaffleMixed;
                value           uniform 298;
                neighbourFieldName T;
                kappa           solidThermo;
                kappaName       none;
            }
        }
    }

    p
    {
        internalField   uniform 100000;

        boundaryField
        {
            empty_2-packs
            {
                type            symmetryPlane;
            }
            wall_packs
            {
                type            calculated;
                value           uniform 0;
            }
            domain5_to_fluid
            {
                type            calculated;
                value           uniform 0;
            }
        }
    }
}

Thanks for answering and helping,
Samuele

samiam1000 · October 21, 2013, 09:26

Hi Tobi,

following your advice, I solved an error, but I now get this message:

Code:

Attempt to cast type calculated to type compressible::turbulentTemperatureCoupledBaffleMixed

However, I think that my BC are properly set. Where may the error be, according to you?

Thanks a lot,
Samuele

Tobi · October 21, 2013, 11:02

Hi

Code:

       domain5_to_fluid
        {
            type            mappedWall;
            nFaces          3997;
            startFace       49350;
            sampleMode      nearestPatchFace;
            sampleRegion    fluid;
            samplePatch     fluid_to_domain1;  // should be fluid_to_domain5 
            offsetMode      uniform;
            offset          (0 0 0);
        }

The other error... can you give me more information?

samiam1000 · October 21, 2013, 11:12

Yeah: it's right.

About the `new error', here is the complete message:

Code:

/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.2.1                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 2.2.1-57f3c3617a2d
Exec   : chtMultiRegionSimpleFoam
Date   : Oct 21 2013
Time   : 16:10:36
Host   : "lab-laptop"
PID    : 2401
Case   : /home/lab/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Disallowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create fluid mesh for region fluid for time = 0

Create solid mesh for region domain1 for time = 0

Create solid mesh for region domain2 for time = 0

Create solid mesh for region domain3 for time = 0

Create solid mesh for region domain5 for time = 0

Create solid mesh for region packs for time = 0

*** Reading fluid mesh thermophysical properties for region fluid

    Adding to thermoFluid

Selecting thermodynamics package 
{
    type            heRhoThermo;
    mixture         pureMixture;
    transport       const;
    thermo          hConst;
    equationOfState perfectGas;
    specie          specie;
    energy          sensibleEnthalpy;
}

    Adding to rhoFluid

    Adding to UFluid

    Adding to phiFluid

    Adding to gFluid

    Adding to turbulence

Selecting turbulence model type RASModel
Selecting RAS turbulence model kEpsilon
kEpsilonCoeffs
{
    Cmu             0.09;
    C1              1.44;
    C2              1.92;
    C3              -0.33;
    sigmak          1;
    sigmaEps        1.3;
    Prt             1;
}

    Adding to ghFluid

    Adding to ghfFluid

--> FOAM Warning : 
    From function Field<Type>::Field(const word& keyword, const dictionary&, const label)
    in file /home/opencfd/OpenFOAM/OpenFOAM-2.2.1/src/OpenFOAM/lnInclude/Field.C at line 262
    Reading "/home/lab/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady/0/fluid/p_rgh" from line 18 to line 20
    expected keyword 'uniform' or 'nonuniform', assuming deprecated Field format from Foam version 2.0.
--> FOAM Warning : 
    From function Field<Type>::Field(const word& keyword, const dictionary&, const label)
    in file /home/opencfd/OpenFOAM/OpenFOAM-2.2.1/src/OpenFOAM/lnInclude/Field.C at line 262
    Reading "/home/lab/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady/0/fluid/p_rgh.boundaryField.intake" from line 55 to line 20
    expected keyword 'uniform' or 'nonuniform', assuming deprecated Field format from Foam version 2.0.
Selecting radiationModel none
    Adding fvOptions

No finite volume options present

*** Reading solid mesh thermophysical properties for region domain1

    Adding to thermos

Selecting thermodynamics package 
{
    type            heSolidThermo;
    mixture         pureMixture;
    transport       constIso;
    thermo          hConst;
    equationOfState rhoConst;
    specie          specie;
    energy          sensibleEnthalpy;
}

    Adding to radiations

Radiation model not active: radiationProperties not found
Selecting radiationModel none
    Adding fvOptions

No finite volume options present

*** Reading solid mesh thermophysical properties for region domain2

    Adding to thermos

Selecting thermodynamics package 
{
    type            heSolidThermo;
    mixture         pureMixture;
    transport       constIso;
    thermo          hConst;
    equationOfState rhoConst;
    specie          specie;
    energy          sensibleEnthalpy;
}

    Adding to radiations

Radiation model not active: radiationProperties not found
Selecting radiationModel none
    Adding fvOptions

No finite volume options present

*** Reading solid mesh thermophysical properties for region domain3

    Adding to thermos

Selecting thermodynamics package 
{
    type            heSolidThermo;
    mixture         pureMixture;
    transport       constIso;
    thermo          hConst;
    equationOfState rhoConst;
    specie          specie;
    energy          sensibleEnthalpy;
}

    Adding to radiations

Radiation model not active: radiationProperties not found
Selecting radiationModel none
    Adding fvOptions

No finite volume options present

*** Reading solid mesh thermophysical properties for region domain5

    Adding to thermos

Selecting thermodynamics package 
{
    type            heSolidThermo;
    mixture         pureMixture;
    transport       constIso;
    thermo          hConst;
    equationOfState rhoConst;
    specie          specie;
    energy          sensibleEnthalpy;
}

    Adding to radiations

Radiation model not active: radiationProperties not found
Selecting radiationModel none
    Adding fvOptions

No finite volume options present

*** Reading solid mesh thermophysical properties for region packs

    Adding to thermos

Selecting thermodynamics package 
{
    type            heSolidThermo;
    mixture         pureMixture;
    transport       constIso;
    thermo          hConst;
    equationOfState rhoConst;
    specie          specie;
    energy          sensibleEnthalpy;
}

    Adding to radiations

Radiation model not active: radiationProperties not found
Selecting radiationModel none
    Adding fvOptions

No finite volume options present

Time = 1


Solving for fluid region fluid
DILUPBiCG:  Solving for Ux, Initial residual = 1, Final residual = 0.00545361, No Iterations 1
DILUPBiCG:  Solving for Uy, Initial residual = 1, Final residual = 0.018735, No Iterations 1
DILUPBiCG:  Solving for Uz, Initial residual = 1, Final residual = 0.00880018, No Iterations 1


--> FOAM FATAL ERROR: 
Attempt to cast type zeroGradient to type compressible::turbulentTemperatureCoupledBaffleMixed

    From function refCast<To>(From&)
    in file /home/opencfd/OpenFOAM/OpenFOAM-2.2.1/src/OpenFOAM/lnInclude/typeInfo.H at line 114.

FOAM aborting

#0  Foam::error::printStack(Foam::Ostream&) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#1  Foam::error::abort() in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#2  Foam::compressible::turbulentTemperatureCoupledBaffleMixedFvPatchScalarField::updateCoeffs() in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libcompressibleTurbulenceModel.so"
#3  Foam::mixedFvPatchField<double>::evaluate(Foam::UPstream::commsTypes) in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libfiniteVolume.so"
#4  Foam::mixedEnergyFvPatchScalarField::updateCoeffs() in "/opt/openfoam221/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
#5  Foam::fvMatrix<double>::fvMatrix(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::dimensionSet const&) in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
#6  
 in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
#7  
 in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
#8  __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6"
#9  
 in "/opt/openfoam221/platforms/linux64GccDPOpt/bin/chtMultiRegionSimpleFoam"
Aborted (core dumped)

Tobi · October 21, 2013, 12:02

T file of fluid please and the boundary file of your fluid domain.

samiam1000 · October 23, 2013, 02:56

Tobi,

pardon for the late answer. I was out of office and I did not have the case with me. Sorry,

Anyway, the file that you want is here:

Code:

    T
    {
        internalField   uniform 298;

        boundaryField
        {
            wall-fluid
            {
                type            zeroGradient;
                value           uniform 273;
            }
            back
            {
                type            zeroGradient;
//                type            fixedValue;
                value           uniform 273;
            }
            empty_1
            {
                type            zeroGradient;
                value           uniform 273;
            }
            empty_2-fluid
            {
                type            symmetryPlane;
            }
            glass
            {
                type            fixedValue;
                value           uniform 298;
            }
            inlet_main
            {
                type            fixedValue;
                value           uniform 273;
            }
            intake
            {
                type            zeroGradient;
                value           uniform 273;
            }
            pcm_surface
            {
                type            fixedValue;
                value           uniform 275;
            }
            fluid_to_domain5
            {
                type            compressible::turbulentTemperatureCoupledBaffleMixed;
                neighbourFieldName T;
                kappa           fluidThermo;
                kappaName       none;
                value           uniform 278;
            }
            fluid_to_domain3
            {
                type            compressible::turbulentTemperatureCoupledBaffleMixed;
                neighbourFieldName T;
                kappa           fluidThermo;
                kappaName       none;
                value           uniform 278;
            }
            fluid_to_domain1
            {
                type            compressible::turbulentTemperatureCoupledBaffleMixed;
                neighbourFieldName T;
                kappa           fluidThermo;
                kappaName       none;
                value           uniform 278;
            }
            fluid_to_packs
            {
                type            compressible::turbulentTemperatureCoupledBaffleMixed;
                neighbourFieldName T;
                kappa           fluidThermo;
                kappaName       none;
                value           uniform 278;
            }
            fluid_to_domain2
            {
                type            compressible::turbulentTemperatureCoupledBaffleMixed;
                neighbourFieldName T;
                kappa           fluidThermo;
                kappaName       none;
                value           uniform 278;
            }
        }
    }

Is there something strange?

samiam1000 · October 23, 2013, 04:37

Tobi,

I have solved that problem, changing the BC. But I still have troubles: now I get this message:

Code:

Solving for solid region domain1


--> FOAM FATAL ERROR: 

    gradientInternalCoeffs cannot be called for a calculatedFvPatchField
    on patch domain1_to_fluid of field h in file "/home/lab/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady/0/domain1/h"
    You are probably trying to solve for a field with a default boundary condition.

    From function calculatedFvPatchField<Type>::gradientInternalCoeffs() const
    in file fields/fvPatchFields/basic/calculated/calculatedFvPatchField.C at line 199.

FOAM exiting

The point is that I don't have any h file, anywhere.

Any idea about this?

Tobi · October 23, 2013, 07:03

Hi,

the T-file Looks good.
The Problem in the cht solver is always that the Domains are related to each other and the Problem could be in both. I worked a Long time with the cht but at the Moment I am not working anymore with it.

Therefor I am getting rusty in the error Messages

Is it possible to upload you 0 Folder and the constant Folder, best way would be the whole case.

Maybe its not possible for you (due to secret) it would be very good to have the 0 Folder and the constant/***/polyMesh/boundary files to have a look at the whole case. It would be the best way to give you a correct answer.

Otherwise you should always get more Information

So if you solving "domain1_to_fluid" it is interessting to have the related files of both Domains.

For your Problem it could be possible that you use "fluidThermo" in the T file for your solid Domain. there should be "solidThermo".

Regards Tobi

samiam1000 · October 23, 2013, 08:20

I can share the case with you via Skype. I have tried to contact you there.

If you are online, please let me know. Otherwise, please write me at samuele.zampini@polimi.com and I'll send you tha case.

Thank you very much,
Samuele

Tobi · October 23, 2013, 08:39

Hi Samuel,

i am online today evening (in 2 hours).
Otherwise you can send me the case Tobias.Holzmann@Holzmann-cfd.de

Regards

Tobi

Ahmed Khattab · October 23, 2013, 11:10

Quote:

Originally Posted by samiam1000

Tobi,

I have solved that problem, changing the BC. But I still have troubles: now I get this message:

Code:

Solving for solid region domain1


--> FOAM FATAL ERROR: 

    gradientInternalCoeffs cannot be called for a calculatedFvPatchField
    on patch domain1_to_fluid of field h in file "/home/lab/Documenti/Ethics/FRISBEE/CFD/testVerticalTN_PCM/PCMPacks/steady/0/domain1/h"
    You are probably trying to solve for a field with a default boundary condition.

    From function calculatedFvPatchField<Type>::gradientInternalCoeffs() const
    in file fields/fvPatchFields/basic/calculated/calculatedFvPatchField.C at line 199.

FOAM exiting

The point is that I don't have any h file, anywhere.

Any idea about this?

Hi,

i experienced such a problem before, already today. i found that my mistake was in changeDirectoryDict where i wrongly wrote than name of interface patch, i simply change uppercase letter to lowercase. that's it.

i hope it will be helpful for you.

samiam1000 · October 23, 2013, 11:24

I'm pretty sure about the patch names, but I'll check them again!

Thanks!

Tobi · October 23, 2013, 13:09

Hi,

1. your changeDict has a wrong entry like ahmed mentioned in your domain2

Code:

            domain2_to_fluid
            {
                type            mappedWall;
                nFaces          3997;
                startFace       49350;
                sampleMode      nearestPatchFace;
                sampleRegion    fluid;
                samplePatch     fluid_to_domain1;  //domain2
                offsetMode      uniform;
                offset          (0 0 0);
            }
        }

2. wrong schemes and solution for your solids

3. wrong changeDict in domain1

Code:

    T
    {
        internalField   uniform 298;

        boundaryField
        {
                    empty_2-packs
                    {
                        type            symmetryPlane;
                    }
                    wall_packs
                    {
                        type            zeroGradient        // forget ";"
                    }
                    domain1_to_fluid
                    {
                                type            compressible::turbulentTemperatureCoupledBaffleMixed;
                                value           uniform 298;
                                neighbourFieldName T;
                                kappa           solidThermo;
                                kappaName       none;
                    }
        }

4. after changeDict on domain2 there are still one error in your "0/domain2/T" file:

Code:

   empty_2-packs
    {
        type            symmetryPlane;
    }
    wall_packs
    {
        type            zeroGradient 
    } 

    domain1_to_fluid 
    { 
       type compressible::turbulentTemperatureCoupledBaffleMixed;
        value           uniform 298;
        neighbourFieldName T;
        kappa           solidThermo;
        kappaName       none;
    }
    domain1_to_fluid                      // wrong - not needed
    {
        type            calculated; 
        value           uniform 0;
        neighbourFieldName T;
        kappa           solidThermo;
        kappaName       none;
    }

After the changes you will get the following output:

Code:

Time = 1


Solving for fluid region fluid
DILUPBiCG:  Solving for Ux, Initial residual = 1, Final residual = 0.0024031, No Iterations 1
DILUPBiCG:  Solving for Uy, Initial residual = 1, Final residual = 0.0099621, No Iterations 1
DILUPBiCG:  Solving for Uz, Initial residual = 1, Final residual = 0.0132661, No Iterations 1
DILUPBiCG:  Solving for h, Initial residual = 1, Final residual = 0.0987243, No Iterations 4
Min/max T:269.145 301.75
DICPCG:  Solving for p_rgh, Initial residual = 0.999968, Final residual = 0.0094627, No Iterations 19
time step continuity errors : sum local = 22257.7, global = -0.00312494, cumulative = -0.00312494
Min/max rho:0.001 1.29413

Solving for solid region domain1
DICPCG:  Solving for h, Initial residual = 1, Final residual = 0.0184498, No Iterations 2
Min/max T:min(T) [0 0 0 1 0 0 0] 297.999 max(T) [0 0 0 1 0 0 0] 298.001

Solving for solid region domain2
DICPCG:  Solving for h, Initial residual = 1, Final residual = 0.0187101, No Iterations 2
Min/max T:min(T) [0 0 0 1 0 0 0] 276.999 max(T) [0 0 0 1 0 0 0] 277.003

Solving for solid region domain3
DICPCG:  Solving for h, Initial residual = 1, Final residual = 0.0906404, No Iterations 1
Min/max T:min(T) [0 0 0 1 0 0 0] 297.999 max(T) [0 0 0 1 0 0 0] 298.001

Solving for solid region domain5
DICPCG:  Solving for h, Initial residual = 1, Final residual = 0.0785481, No Iterations 1
Min/max T:min(T) [0 0 0 1 0 0 0] 297.999 max(T) [0 0 0 1 0 0 0] 298.002

Solving for solid region packs
DICPCG:  Solving for h, Initial residual = 1, Final residual = 0.0262329, No Iterations 2
Min/max T:min(T) [0 0 0 1 0 0 0] 297.999 max(T) [0 0 0 1 0 0 0] 298.001
ExecutionTime = 5.9 s  ClockTime = 6 s

- the second iteration is bad but I switched off the turbulence modelling and do not check the BC.

Have fun and good luck.

Regard
Tobi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Compile calcMassFlowC	aurore	OpenFOAM Programming & Development	13	March 23, 2018 07:43
[OpenFOAM] Saving ParaFoam views and case	sail	ParaView	9	November 25, 2011 15:46
Version 15 on Mac OS X	gschaider	OpenFOAM Installation	113	December 2, 2009 10:23
How to get the max value of the whole field	waynezw0618	OpenFOAM Running, Solving & CFD	4	June 17, 2008 05:07
user defined function	cfduser	CFX	0	April 29, 2006 10:58

October 12, 2013, 15:16		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Hi Samuele, Try this: Code: find . -name ".T" It will tell you where the files named ".T" are located. By the way, on Linux, files that start with "." are usually considered as hidden files. To see then, use the "-a" option with "ls" or "ll", for examples: Code: ls -a ll -a ls -la The two last ones should be the same, because "ll" is an alias (when defined as such), as proved by this command: Code: alias ll Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

October 14, 2013, 06:38		#4
Tobi Super Moderator Tobias Holzmann Join Date: Oct 2010 Location: Tussenhausen Posts: 2,708 Blog Entries: 6 Rep Power: 51	Hi Samuel, the first error is nice - never seen that befor. The last error "Floating Point exeption" occure if you are dividing by Zero. Check all your BC and set always the "value uniform X" keyword. But hmmm ... it seems that you get the error while updating the thermodynamics. Maybe when the constructor is selected. But first check my first hint. Your meshes are okay? Boundary files okay too? Regards Tobi

October 14, 2013, 07:49		#5
samiam1000 Senior Member Samuele Z Join Date: Oct 2009 Location: Mozzate - Co - Italy Posts: 520 Rep Power: 18	Dear Tobi, thanks for answering. Well, let me have a look at all the BC. Anyway, I am pretty confident it is ok! As far as the mesh is concerned, it should be alright. I'll give you a feedback, soon. Thanks a lot, Samuele

October 21, 2013, 06:28		#7
Tobi Super Moderator Tobias Holzmann Join Date: Oct 2010 Location: Tussenhausen Posts: 2,708 Blog Entries: 6 Rep Power: 51	Hi, first of all post the p_rgh file (0/fluid/p_rgh). And the second error (Segmentation fault) is in your domain5. You have an error there.

October 21, 2013, 09:26		#9
samiam1000 Senior Member Samuele Z Join Date: Oct 2009 Location: Mozzate - Co - Italy Posts: 520 Rep Power: 18	Hi Tobi, following your advice, I solved an error, but I now get this message: Code: Attempt to cast type calculated to type compressible::turbulentTemperatureCoupledBaffleMixed However, I think that my BC are properly set. Where may the error be, according to you? Thanks a lot, Samuele

October 21, 2013, 11:02		#10
Tobi Super Moderator Tobias Holzmann Join Date: Oct 2010 Location: Tussenhausen Posts: 2,708 Blog Entries: 6 Rep Power: 51	Hi Code: domain5_to_fluid { type mappedWall; nFaces 3997; startFace 49350; sampleMode nearestPatchFace; sampleRegion fluid; samplePatch fluid_to_domain1; // should be fluid_to_domain5 offsetMode uniform; offset (0 0 0); } The other error... can you give me more information?

October 21, 2013, 12:02		#12
Tobi Super Moderator Tobias Holzmann Join Date: Oct 2010 Location: Tussenhausen Posts: 2,708 Blog Entries: 6 Rep Power: 51	T file of fluid please and the boundary file of your fluid domain.

October 23, 2013, 07:03		#15
Tobi Super Moderator Tobias Holzmann Join Date: Oct 2010 Location: Tussenhausen Posts: 2,708 Blog Entries: 6 Rep Power: 51	Hi, the T-file Looks good. The Problem in the cht solver is always that the Domains are related to each other and the Problem could be in both. I worked a Long time with the cht but at the Moment I am not working anymore with it. Therefor I am getting rusty in the error Messages Is it possible to upload you 0 Folder and the constant Folder, best way would be the whole case. Maybe its not possible for you (due to secret) it would be very good to have the 0 Folder and the constant/***/polyMesh/boundary files to have a look at the whole case. It would be the best way to give you a correct answer. Otherwise you should always get more Information So if you solving "domain1_to_fluid" it is interessting to have the related files of both Domains. For your Problem it could be possible that you use "fluidThermo" in the T file for your solid Domain. there should be "solidThermo". Regards Tobi

October 23, 2013, 08:20		#16
samiam1000 Senior Member Samuele Z Join Date: Oct 2009 Location: Mozzate - Co - Italy Posts: 520 Rep Power: 18	I can share the case with you via Skype. I have tried to contact you there. If you are online, please let me know. Otherwise, please write me at samuele.zampini@polimi.com and I'll send you tha case. Thank you very much, Samuele

October 23, 2013, 08:39		#17
Tobi Super Moderator Tobias Holzmann Join Date: Oct 2010 Location: Tussenhausen Posts: 2,708 Blog Entries: 6 Rep Power: 51	Hi Samuel, i am online today evening (in 2 hours). Otherwise you can send me the case Tobias.Holzmann@Holzmann-cfd.de Regards Tobi

October 23, 2013, 11:24		#19
samiam1000 Senior Member Samuele Z Join Date: Oct 2009 Location: Mozzate - Co - Italy Posts: 520 Rep Power: 18	I'm pretty sure about the patch names, but I'll check them again! Thanks!