|
[Sponsors] |
getting difficulties in developing fully developed flow through pipe.by openFoam |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
New Member
Join Date: Jan 2014
Posts: 1
Rep Power: 0 ![]() |
![]() ![]() |
|
![]() |
![]() |
![]() |
![]() |
#2 |
Super Moderator
Tobias Holzmann
Join Date: Oct 2010
Location: Tussenhausen
Posts: 2,708
Blog Entries: 6
Rep Power: 51 ![]() ![]() ![]() |
Did you save a Iteration step ?
1. where is your inlet 2. are the vector orientations correct or do you want to have a flow from left to right? 3. with your smart description and Information ist not possible to give a hint. Regards Tobi |
|
![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
vidyadhar
Join Date: Jul 2016
Posts: 138
Rep Power: 9 ![]() |
Hello Tobi,
I would like to implement fully developed flow through a T-junction having one inlet with two outlets(also for two inlets with one outlet). It is having rectangular cross-section. I am using Caelus 6.04 which is similar to OpenFoam. Can you help me in implementing the fully developed velocity boundary condition at the inlet(s). Thanks & Regards, vidyadhar |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fully developed flow inlet | Pleb | STAR-CCM+ | 5 | November 25, 2011 11:25 |
initial condition for fully developed flow | kmgraju | CFX | 3 | August 6, 2010 05:57 |
Fully developed flow profile | icfd | Main CFD Forum | 3 | May 20, 2009 22:21 |
fully developed flow in diffusor | Fabian | CFX | 1 | September 19, 2001 18:13 |
fluid flow fundas | ram | Main CFD Forum | 5 | June 17, 2000 21:31 |