|
[Sponsors] |
October 11, 2014, 03:09 |
Problem on compressibleInterDyMFoam
|
#1 |
New Member
Joe Bean
Join Date: Sep 2013
Posts: 1
Rep Power: 0 |
Hi, everyone
OpenFOAM 2.3.0 is used and the test case is multiphase/compressibleInterFoam/laminar/depthCharge3D with the dynamicMeshDict in multiphase/interDyMFoam/ras/damBreakWithObstacle. The error is at the 2nd time step, as follows: Starting time loop Courant Number mean: 0 max: 0 deltaT = 0.00011904762 Time = 0.000119047619 Selected 960 cells for refinement out of 16000. Refined from 16000 to 22720 cells. Selected 0 split points out of a possible 960. Execution time for mesh.update() = 0.15 s GAMGPCG: Solving for pcorr, Initial residual = 0, Final residual = 0, No Iterations 0 time step continuity errors : sum local = 0, global = 0, cumulative = 0 MULES: Solving for alpha.water Liquid phase volume fraction = 0.498 Min(alpha1) = 0 Min(alpha2) = 0 diagonal: Solving for rho, Initial residual = 0, Final residual = 0, No Iterations 0 smoothSolver: Solving for T, Initial residual = 8.55321e-09, Final residual = 8.55321e-09, No Iterations 0 GAMG: Solving for p_rgh, Initial residual = 0.088495588, Final residual = 0.00025648365, No Iterations 1 max(U) 9.2807149 min(p_rgh) 99975.122 GAMGPCG: Solving for p_rgh, Initial residual = 5.8000153e-05, Final residual = 3.9737119e-08, No Iterations 2 max(U) 7.6445068 min(p_rgh) 99997.455 ExecutionTime = 0.52 s Courant Number mean: 0.00015167361 max: 0.03925692 deltaT = 0.00013945578 Time = 0.0002585034014 Selected 3792 cells for refinement out of 22720. Refined from 22720 to 49264 cells. --> FOAM FATAL ERROR: Incompatible size before mapping. Field size: 16000 map size: 22720 From function void MapInternalField<Type, MeshMapper, volMesh>:perator() ( Field<Type>& field, const MeshMapper& mapper ) const in file lnInclude/MapFvVolField.H at line 73. FOAM aborting #0 Foam::error:rintStack(Foam::Ostream&) at ??:? #1 Foam::error::abort() at ??:? #2 at fvMesh.C:? #3 at fvMesh.C:? #4 Foam::fvMesh::mapFields(Foam::mapPolyMesh const&) at ??:? #5 Foam::fvMesh::updateMesh(Foam::mapPolyMesh const&) at ??:? #6 Foam::dynamicRefineFvMesh::refine(Foam::List<int> const&) at ??:? #7 Foam::dynamicRefineFvMesh::update() at ??:? #8 at ??:? #9 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #10 at ??:? can you help me? thanks Joe |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
UDF compiling problem | Wouter | Fluent UDF and Scheme Programming | 6 | June 6, 2012 04:43 |
Gambit - meshing over airfoil wrapping (?) problem | JFDC | FLUENT | 1 | July 11, 2011 05:59 |
natural convection problem for a CHT problem | Se-Hee | CFX | 2 | June 10, 2007 06:29 |
Adiabatic and Rotating wall (Convection problem) | ParodDav | CFX | 5 | April 29, 2007 19:13 |
Is this problem well posed? | Thomas P. Abraham | Main CFD Forum | 5 | September 8, 1999 14:52 |