Parcels injection with sprayFoam

Cluap · May 13, 2015, 03:32

Hello everybody,

I am simulating gasoline sprays with openfoam.

I was working with OpenFoam 1.7.1 so I was using the dieselFoam solver with the diesel spray sources but I've just switched to OpenFoam 2.3.1 where the dieselFoam solver has been replaced by the sprayFoam solver and the lagrangian sources have been completely rewritten.

So I'm a bit confused on how the new lagrangian sources work.
For example, I've found the injection models (in lagrangian/intermediate/submodels/Kinematic/InjectionModel) but I don't understand where they are called. In OpenFoam 1.7.1 there was the sprayInject file which defined the injection process but I can't find any equivalent thing in the 2.3.1 version.

If anybody could come up with some explanations on the working of the new lagrangian sources, it would be a great help.

Best regards.

Cluap · May 18, 2015, 02:22

Hi everyone !

Nobody to help me on that ?
Any suggestion would be much appreciated.

Thanks in advance !

wolfindark · July 12, 2015, 10:54

look at the tutorials for sprayFoam.

Tom123 · February 15, 2016, 07:36

Dear Cluap,
I am confused by the same questions right now. If you get the answers to these questions, please share your helpful comments.

May 13, 2015, 03:32	Parcels injection with sprayFoam	#1
Cluap New Member Join Date: Sep 2014 Posts: 11 Rep Power: 11	Hello everybody, I am simulating gasoline sprays with openfoam. I was working with OpenFoam 1.7.1 so I was using the dieselFoam solver with the diesel spray sources but I've just switched to OpenFoam 2.3.1 where the dieselFoam solver has been replaced by the sprayFoam solver and the lagrangian sources have been completely rewritten. So I'm a bit confused on how the new lagrangian sources work. For example, I've found the injection models (in lagrangian/intermediate/submodels/Kinematic/InjectionModel) but I don't understand where they are called. In OpenFoam 1.7.1 there was the sprayInject file which defined the injection process but I can't find any equivalent thing in the 2.3.1 version. If anybody could come up with some explanations on the working of the new lagrangian sources, it would be a great help. Best regards.

May 18, 2015, 02:22	Parcels injection with sprayFoam	#2
Cluap New Member Join Date: Sep 2014 Posts: 11 Rep Power: 11	Hi everyone ! Nobody to help me on that ? Any suggestion would be much appreciated. Thanks in advance !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Multiple Injection points in sprayFoam	kripalpariyangat	OpenFOAM Pre-Processing	13	October 29, 2022 01:22
Unfinished particle tracks in simpleReactingParcelFoam	Cornelia	OpenFOAM Running, Solving & CFD	3	June 5, 2015 03:58
injection problem	Mark New	FLUENT	0	August 4, 2013 01:30
sprayFoam crashes	lukasfischer	OpenFOAM Running, Solving & CFD	3	July 14, 2013 11:08
jou file command for the injection!	asal	FLUENT	0	June 4, 2013 04:15

July 12, 2015, 10:54		#3
wolfindark Member Neilson Whit Join Date: Aug 2011 Posts: 74 Rep Power: 14	look at the tutorials for sprayFoam.

February 15, 2016, 07:36		#4
Tom123 New Member Tomladian Bucinara Join Date: Jan 2015 Posts: 18 Rep Power: 11	Dear Cluap, I am confused by the same questions right now. If you get the answers to these questions, please share your helpful comments.