[huecu588755]

I'm trying to install Nrel sowfa code, but failed in version 3.0.1.I wonder if anyone suceed in installing it and which version is proper to swofa.
Thanks

[consuto]

Hello ,
I was trying to install and SOWFA into my ubuntu 16.04 lts. after unzip the file SOWFA-master into my Home, I run the ./makeNewWorkingDir .(I installed OpenFOM 2.4.0 in Ubuntu 16.04) ,it was show error like:
cp: cannot stat '/ifs/dm/cfd/app/OpenFOAM/SOWFA': No such file or directory

anyway, I active my openFOAM and also
cp -rs $SOWFAdir $WM_PROJECT_USER_DIR in SOWFA-master directory.

What should I do next.

Thanks for your help.

Sam

[consuto]

I just changed the folder to my SOWFA directory and now it is Okay.

But there is still some fatal error at the end like this.

pisoFoamTurbine.C:38:49: fatal error: [/COLOR]horizontalAxisWindTurbinesALMfastv8.H: No such file or directory
compilation terminated.
pisoFoamTurbine.dep:687: recipe for target 'Make/linux64GccDPOpt/pisoFoamTurbine.o' failed
make: *** [Make/linux64GccDPOpt/pisoFoamTurbine.o] Error 1
Making dependency list for source file pisoFoamTurbine.C
could not open file horizontalAxisWindTurbinesADM.H for source file pisoFoamTurbine.C due to No such file or directory
SOURCE=pisoFoamTurbine.C ; g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3 -DNoRepository -ftemplate-depth-100 -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/turbulenceModels/incompressible/turbulenceModel -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/transportModels -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/transportModels/incompressible/singlePhaseTransportModel -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/finiteVolume/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/meshTools/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/fvOptions/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/sampling/lnInclude -I/home/sam/OpenFOAM/sam-2.4.0/src/turbineModels/turbineModelsStandard/lnInclude -IlnInclude -I. -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/OpenFOAM/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linux64GccDPOpt/pisoFoamTurbine.o
pisoFoamTurbine.C:38:43: fatal error: horizontalAxisWindTurbinesADM.H: No such file or directory
compilation terminated.
pisoFoamTurbine.dep:687: recipe for target 'Make/linux64GccDPOpt/pisoFoamTurbine.o' failed
make: *** [Make/linux64GccDPOpt/pisoFoamTurbine.o] Error 1
Making dependency list for source file turbineTestHarness.C
could not open file horizontalAxisWindTurbinesALM.H for source file turbineTestHarness.C due to No such file or directory
SOURCE=turbineTestHarness.C ; g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3 -DNoRepository -ftemplate-depth-100 -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/turbulenceModels/incompressible/turbulenceModel -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/transportModels -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/transportModels/incompressible/singlePhaseTransportModel -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/finiteVolume/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/meshTools/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/fvOptions/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/sampling/lnInclude -I/home/sam/OpenFOAM/sam-2.4.0/src/turbineModels/turbineModelsStandard/lnInclude -IlnInclude -I. -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/OpenFOAM/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linux64GccDPOpt/turbineTestHarness.o
turbineTestHarness.C:34:43: fatal error: horizontalAxisWindTurbinesALM.H: No such file or directory
compilation terminated.
turbineTestHarness.dep:680: recipe for target 'Make/linux64GccDPOpt/turbineTestHarness.o' failed
make: *** [Make/linux64GccDPOpt/turbineTestHarness.o] Error 1
Making dependency list for source file turbineTestHarness.C
could not open file horizontalAxisWindTurbinesALMAdvanced.H for source file turbineTestHarness.C due to No such file or directory
SOURCE=turbineTestHarness.C ; g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3 -DNoRepository -ftemplate-depth-100 -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/turbulenceModels/incompressible/turbulenceModel -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/transportModels -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/transportModels/incompressible/singlePhaseTransportModel -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/finiteVolume/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/meshTools/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/fvOptions/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/sampling/lnInclude -I/home/sam/OpenFOAM/sam-2.4.0/src/turbineModels/turbineModelsStandard/lnInclude -IlnInclude -I. -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/OpenFOAM/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linux64GccDPOpt/turbineTestHarness.o
turbineTestHarness.C:34:51: fatal error: horizontalAxisWindTurbinesALMAdvanced.H: No such file or directory
compilation terminated.
turbineTestHarness.dep:680: recipe for target 'Make/linux64GccDPOpt/turbineTestHarness.o' failed
make: *** [Make/linux64GccDPOpt/turbineTestHarness.o] Error 1

[consuto]

pisoFoamTurbine.C:38:49: fatal error: horizontalAxisWindTurbinesALMfastv8.H: No such file or directory
compilation terminated.
pisoFoamTurbine.dep:687: recipe for target 'Make/linux64GccDPOpt/pisoFoamTurbine.o' failed
make: *** [Make/linux64GccDPOpt/pisoFoamTurbine.o] Error 1
Making dependency list for source file pisoFoamTurbine.C
could not open file horizontalAxisWindTurbinesADM.H for source file pisoFoamTurbine.C due to No such file or directory
SOURCE=pisoFoamTurbine.C ; g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3 -DNoRepository -ftemplate-depth-100 -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/turbulenceModels/incompressible/turbulenceModel -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/transportModels -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/transportModels/incompressible/singlePhaseTransportModel -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/finiteVolume/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/meshTools/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/fvOptions/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/sampling/lnInclude -I/home/sam/OpenFOAM/sam-2.4.0/src/turbineModels/turbineModelsStandard/lnInclude -IlnInclude -I. -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/OpenFOAM/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linux64GccDPOpt/pisoFoamTurbine.o
pisoFoamTurbine.C:38:43: fatal error: horizontalAxisWindTurbinesADM.H: No such file or directory
compilation terminated.
pisoFoamTurbine.dep:687: recipe for target 'Make/linux64GccDPOpt/pisoFoamTurbine.o' failed
make: *** [Make/linux64GccDPOpt/pisoFoamTurbine.o] Error 1
Making dependency list for source file turbineTestHarness.C
could not open file horizontalAxisWindTurbinesALM.H for source file turbineTestHarness.C due to No such file or directory
SOURCE=turbineTestHarness.C ; g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3 -DNoRepository -ftemplate-depth-100 -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/turbulenceModels/incompressible/turbulenceModel -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/transportModels -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/transportModels/incompressible/singlePhaseTransportModel -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/finiteVolume/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/meshTools/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/fvOptions/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/sampling/lnInclude -I/home/sam/OpenFOAM/sam-2.4.0/src/turbineModels/turbineModelsStandard/lnInclude -IlnInclude -I. -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/OpenFOAM/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linux64GccDPOpt/turbineTestHarness.o
turbineTestHarness.C:34:43: fatal error: horizontalAxisWindTurbinesALM.H: No such file or directory
compilation terminated.
turbineTestHarness.dep:680: recipe for target 'Make/linux64GccDPOpt/turbineTestHarness.o' failed
make: *** [Make/linux64GccDPOpt/turbineTestHarness.o] Error 1
Making dependency list for source file turbineTestHarness.C
could not open file horizontalAxisWindTurbinesALMAdvanced.H for source file turbineTestHarness.C due to No such file or directory
SOURCE=turbineTestHarness.C ; g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3 -DNoRepository -ftemplate-depth-100 -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/turbulenceModels/incompressible/turbulenceModel -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/transportModels -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/transportModels/incompressible/singlePhaseTransportModel -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/finiteVolume/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/meshTools/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/fvOptions/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/sampling/lnInclude -I/home/sam/OpenFOAM/sam-2.4.0/src/turbineModels/turbineModelsStandard/lnInclude -IlnInclude -I. -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/OpenFOAM/lnInclude -I/home/sam/OpenFOAM/OpenFOAM-2.4.0/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linux64GccDPOpt/turbineTestHarness.o
turbineTestHarness.C:34:51: fatal error: horizontalAxisWindTurbinesALMAdvanced.H: No such file or directory
compilation terminated.
turbineTestHarness.dep:680: recipe for target 'Make/linux64GccDPOpt/turbineTestHarness.o' failed
make: *** [Make/linux64GccDPOpt/turbineTestHarness.o] Error 1
-----------------------------------------------------------------
Some error as above need to install other software?
Please help me out.

Thanks.
Sam