 |
 |
 |
|
|
|
[Sponsors] | ||||
no prescribed motion with mesquite motion solver |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 6, 2017, 14:53
|
no prescribed motion with mesquite motion solver
|
#1 |
|
New Member
ZHENKAI ZHAO
Join Date: Oct 2015
Posts: 14
Rep Power: 10  |
Hi, guys,
Recently I am using dynamicTopoFvMesh with mesquiteMotionSolver to solve large mesh deformation. I start with a simple oscillating cylinder motion. But when I run the case, The cylinder don't move and only a tiny mesh deformation for the first time step. I have no idea in which part did I make wrong settings. The case can be downloaded from the link below. Can someone give some suggestions? https://drive.google.com/drive/folde...Gp1WDRtMGVyRTg Btw, can I use this method to solve multi-patch motions with positions and orientations received from another programme, i.e. coupling with external programmes? Thanks a lot for any help. ZHENKAI |
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
| [ANSYS Meshing] Help with element size | sandri_92 | ANSYS Meshing & Geometry | 14 | November 14, 2018 07:54 |
| DynamicsMeshFv - Rotating motion with prescribed time | shereez234 | OpenFOAM Programming & Development | 3 | December 6, 2016 07:20 |
| Hybrid discretisation - blend factor | gcoopermax | CFX | 5 | September 23, 2016 08:05 |
| thobois class engineTopoChangerMesh error | Peter_600 | OpenFOAM | 4 | August 2, 2014 09:52 |
Linear Mode
