|
[Sponsors] |
July 5, 2018, 22:12 |
Compressible Flow - Fanno Flow.
|
#1 |
New Member
Rodrigo
Join Date: Jun 2018
Posts: 5
Rep Power: 7 |
Hello everyone, I'm Rodrigo,
This is my first intervention in the forum. I'm doing compressible flow simulations, Fanno flow with Ansys, and I need to do the same with OpenFoam software. I really do not know what solver, or how to start using it, could you please help me? Thank you very much. |
|
July 6, 2018, 02:11 |
|
#2 |
New Member
Ventós
Join Date: Dec 2017
Posts: 7
Rep Power: 8 |
Hi Rodrigo,
I suggest you to look at the tutorials. If you have installed OF v5 properly you can directly type in your terminal "tut" and you are in: "/opt/openfoam5/tutorials" For your case I will start to study an incompressible steady state case (solver: "simpleFoam") like for example: "/opt/openfoam5/tutorials/incompressible/simpleFoam/pitzDaily" Afterwards you can study compressible steady state cases, because for you I guess "rhoSimpleFoam" is the solver you need. Regards. |
|
July 10, 2018, 18:59 |
|
#3 |
New Member
Rodrigo
Join Date: Jun 2018
Posts: 5
Rep Power: 7 |
Thank you very much for your answer,
I started doing all the tutorials. I used the recommended solver, my biggest problem (in all my simulations with OpenFoam) is to correctly set the boundary conditions. Please, I need a lot of help. Attached image of the case that I am trying to simulate. Thank you. |
|
Tags |
compressible flow, openfaom |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Incompressible and compressible flow. | Confused student. | Main CFD Forum | 27 | March 18, 2017 12:25 |
Compressible flow, no data at the outlet | mireis | FLUENT | 6 | September 3, 2015 02:10 |
help with compressible flow BC's (need subsonic flow) | meangreen | Main CFD Forum | 5 | July 24, 2010 13:16 |
Solving unsteady compressible low speed flow | atit | Main CFD Forum | 8 | July 31, 2000 13:19 |
compressible channel flow.. | R.D.Prabhu | Main CFD Forum | 0 | July 17, 1998 17:23 |