Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

low reynolds settings for kOmega and kEpsilon turbulence models

Updated Threads

Search this Thread

Prev

Previous Post

Next Post

Next

November 14, 2018, 15:29	low reynolds settings for kOmega and kEpsilon turbulence models	#1
emjay New Member Marko Josic Join Date: Dec 2010 Posts: 20 Rep Power: 15	hello community, may someone have a short and correct answer howto set up the wall boundary conditions for walls with an full resolved mesh (y+ ~1 / low reynolds approach). (case is also incompressible) kOmegaSST model for walls: U -> noSlip p -> zeroGradient k -> fixedValue (0 or 1e-12) omega -> ??? nut -> calculated? kEpsilon model for walls: U -> noSlip p -> zeroGradient k -> fixedValue (0 or 1e-12) epsilon -> ??? nut -> calculated? thank you in advance!

Tags

full resolved mesh, kepsilon, komegasst, lowre

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PANS turbulence models	HelioVillanueva	OpenFOAM Programming & Development	38	August 4, 2023 01:58
Validation of homogeneous turbulence with constant shear for RANS models	GeorgS	OpenFOAM Running, Solving & CFD	2	August 30, 2018 15:11
[Contribution] Implementation of three turbulence models in openFoam	Ardali	OpenFOAM Programming & Development	0	August 25, 2015 03:23
Calculation of initial k for RAS turbulence models	shipman	OpenFOAM	1	August 28, 2013 03:52
KOmega Turbulence model from wwwopenFOAMWikinet	philippose	OpenFOAM Running, Solving & CFD	30	August 4, 2010 10:26

All times are GMT -4. The time now is 06:33.