[VigneshSP]

Hi,
I've been trying to simulate the phase change process of water to ice conversion using OpenFOAM+ v1906.
I'm using buoyantBoussinesqPimpleFoam solver. its showing the following error.

/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  v1806                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.com                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : v1806
Arch   : "LSB;label=32;scalar=64"
Exec   : /opt/OpenFOAM/OpenFOAM-v1806/platforms/linux64GccDPInt32Opt/bin/buoyantBoussinesqPimpleFoam
Date   : Oct 07 2019
Time   : 08:59:26
Host   : "169f1426ec96"
PID    : 882
I/O    : uncollated
Case   : /mnt/secondary/solidification/case
nProcs : 1
trapFpe: Floating point exception trapping enabled (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10)
allowSystemOperations : Allowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0


PIMPLE: Operating solver in PISO mode

Reading thermophysical properties

Reading field T

Reading field p_rgh

Reading field U

Reading/calculating face flux field phi

Selecting incompressible transport model Newtonian
Creating turbulence model

Selecting turbulence model type laminar
Selecting laminar stress model Stokes
Reading field alphat


Reading g

Reading hRef
Calculating field g.h

No MRF models present

Radiation model not active: radiationProperties not found
Selecting radiationModel none
Creating finite volume options from "system/fvOptions"

Selecting finite volume options type solidificationMeltingSource
    Source: solidificationMeltingSource1
    - selecting cells using cellZone domain
    - selected 1600 cell(s) with volume 0.08


--> FOAM FATAL ERROR: 

    request for basicThermo thermophysicalProperties from objectRegistry region0 failed
    available objects of type basicThermo are
0()

    From function const Type& Foam::objectRegistry::lookupObject(const Foam::word&, bool) const [with Type = Foam::basicThermo]
    in file /home/buzz2/pawan/OpenFOAM/1806-docker/OpenFOAM-v1806/src/OpenFOAM/lnInclude/objectRegistryTemplates.C at line 239.

FOAM aborting

#0  Foam::error::printStack(Foam::Ostream&) at ??:?
#1  Foam::error::abort() at ??:?
#2  Foam::basicThermo const& Foam::objectRegistry::lookupObject<Foam::basicThermo>(Foam::word const&, bool) const at ??:?
#3  Foam::fv::solidificationMeltingSource::solidificationMeltingSource(Foam::word const&, Foam::word const&, Foam::dictionary const&, Foam::fvMesh const&) at ??:?
#4  Foam::fv::option::adddictionaryConstructorToTable<Foam::fv::solidificationMeltingSource>::New(Foam::word const&, Foam::word const&, Foam::dictionary const&, Foam::fvMesh const&) at ??:?
#5  Foam::fv::option::New(Foam::word const&, Foam::dictionary const&, Foam::fvMesh const&) at ??:?
#6  Foam::fv::optionList::reset(Foam::dictionary const&) at ??:?
#7  Foam::fv::optionList::optionList(Foam::fvMesh const&, Foam::dictionary const&) at ??:?
#8  Foam::fv::options::options(Foam::fvMesh const&) at ??:?
#9  Foam::fv::options::New(Foam::fvMesh const&) at ??:?
#10  ? at ??:?
#11  __libc_start_main in /lib64/libc.so.6
#12  ? at ??:?

The attached gzip is the case folder.

case.tar.gz


Thanks in advance

[VigneshSP]

I got it solved, i was using buoyantBoussinesqPimpleFoam along with solidificationMeltingSource, i re-did the case using buoyantPimpleFoam and it ran well.