CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

janafThermo warnings with ICE RCCI combustion simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 9, 2020, 10:05
Default janafThermo warnings with ICE RCCI combustion simulation
  #1
New Member
 
Join Date: Nov 2020
Posts: 1
Rep Power: 0
adsad is on a distinguished road
Hello,

I have a question regarding multiple warnings I'm receiving during my OpenFOAM simulations. I constantly encounter FOAM Warnings about janafThermo being out of temperature range (so temperature being below 300 [K]).

A little background on my project. I'm trying to simulate RCCI combustion within an ICE, using IC8H18 as a low reactive PFI fuel and NC12H26 as a high reactive DI fuel. This engine is simulated from crankangle -153 aTDC till 150 aTDC. For the boundary conditions at crankangle -153 I used GT-Power to determine the conditions like pressure, temperature etc.

The solver which I'm using to simulate is a solver from the LibICE library, called TDACCCMdieselEngineDyMFoam.

Everytime I run my case I get these janafThermo warnings and after a while the simulations stops with errors. I tried different cases using different boundary conditions, but still the temperature diverges beyond the temperature range. I also tried reducing my time step for the simulation, still the same problem.

I was wondering if anyone could help me out ? I'm fairly new to OpenFOAM as this is my first time working with OF.

Thanks
adsad is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Constant Volume Combustion Chamber Simulation sTeF88 CONVERGE 6 October 24, 2024 06:50
thermal regeration of diesel particle filter (fixed bed combustion simulation) Weiqiang Liu FLUENT 0 April 22, 2020 10:57
Challenges in ICE Combustion Message Interpretation and Possible Solution Provision ELITECHNIST ANSYS 0 February 18, 2019 20:13
Liquid Fuel Combustion Simulation - need some guidance sa007057 FLUENT 0 September 15, 2014 14:57
ice melting simulation pratikmehta ANSYS 3 April 17, 2013 10:52


All times are GMT -4. The time now is 03:47.