CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Cone Injector seems to give a planar emission

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 3, 2021, 18:00
Default Cone Injector seems to give a planar emission
  #1
New Member
 
John Wooten, PhD
Join Date: Dec 2020
Location: Oak Ridge TN
Posts: 18
Rep Power: 5
Woo37830 is on a distinguished road
I have a cone Injector set up to hopefully create a conic spray using:

HTML Code:
    parcelBasisType        fixed;
            flowRateProfile constant 1.0;
            Umag            constant 14.0;
            thetaInner        constant 0;
            thetaOuter       constant 45;

            sizeDistribution
            {
                type        normal;
                normalDistribution
                {
                     minValue	 1e-06;
                     maxValue    1e-04;
                     expectation 3.0e-05;
                     variance    2e-5;
                }
What I am getting is a spray of about 45 degrees vertically and 2 degrees horizontally. How do I get a solid cone?
Woo37830 is offline   Reply With Quote

Old   August 13, 2021, 06:09
Default
  #2
New Member
 
SHAHID
Join Date: Feb 2020
Posts: 3
Rep Power: 6
SRMIRZA is on a distinguished road
direction (0 0.1 1);
thetaInner constant 0;
thetaOuter constant 45;
SRMIRZA is offline   Reply With Quote

Reply

Tags
cone angle, cone injection, distribution

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to give enough info to get help linnemann OpenFOAM 8 September 20, 2017 09:19
how do you set up for a cone baffle? myrbs1 FLOW-3D 0 July 29, 2014 18:06
DPM: Cone and Solid Cone injection - what's the difference? JaC FLUENT 0 January 5, 2010 09:20
Hollow Cone Injection Problem JaC FLUENT 1 December 3, 2009 03:03
Parallel Plate Rheometer vs Cone & Plate beginner Main CFD Forum 0 March 19, 2003 11:49


All times are GMT -4. The time now is 19:47.