Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

totalPressure BC gamma problem

Updated Threads

Search this Thread

Prev

Previous Post

Next Post

Next

September 6, 2022, 04:04	totalPressure BC gamma problem	#1
seyfigirgin New Member Seyfi Girgin Join Date: Aug 2015 Posts: 12 Rep Power: 10	Hi all, I am trying to solve an intake problem using hisa solver. At first outlet is zeroGradient and after some iteration, i am giving total pressure boundary condition at the outlet. Like; type totalPressure; p0 uniform 120000; gamma 1.4; When i check the run after some iteration i am seeing that gamma value turns to 1 by openfoam. I don't understand this. What could be the reason?

Tags

gamma, intake, outlet, pressure, totalpressure bc

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
area does not match neighbour by ... % -- possible face ordering problem	St.Pacholak	OpenFOAM	10	February 7, 2024 21:50
Large problem partitioner	tzy	CFX	3	February 7, 2018 17:11
Heat Transfert, mixing problem	Wazdq	CFX	8	November 7, 2016 05:44
natural convection problem for a CHT problem	Se-Hee	CFX	2	June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13

All times are GMT -4. The time now is 06:54.