|
[Sponsors] |
Question on InterFoam moving mesh capabilities |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 23, 2008, 10:11 |
Good morning everyone,
I ha
|
#1 |
New Member
Ziv Teller
Join Date: Mar 2009
Posts: 1
Rep Power: 0 |
Good morning everyone,
I have a few simple newbie question regarding the actual interFoam solver moving mesh capabilities. I tried to get the solver to work with a moving mesh following the leads I found in many posts with no success. Basically my simulation runs but nothing in the mesh moves nor its geometry is updated in the time directories. On the other hand I was able to get a moving mesh simulation working with icoDyMFoam. Comparing the source code of the icoDyMFoam and interFoam solvers I don't see any call to the mesh.update method in the latter. At this point my questions are: 1) Are moving mesh capabilities available in the interFoam solver from the standard binary 1.4.1 distribution or modification to the solver are required ? 2) Does anyone have a simple interFoam moving mesh case to study as a starting point. 3) Is there a description of the fvDynamicMesh dictionary with all its options. 4) What kind of boundary conditions are available to a moving wall patch ? Any help would be appreciated. Thanks Ziv |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
InterFoam mass conservation question | msrinath80 | OpenFOAM Running, Solving & CFD | 5 | December 9, 2013 02:19 |
InterFoam and moving mesh | fugu | OpenFOAM Running, Solving & CFD | 0 | March 10, 2008 17:54 |
InterFoam and moving mesh | guitton | OpenFOAM Running, Solving & CFD | 0 | February 17, 2008 12:38 |
moving mesh capabilities | sb | CFX | 2 | April 12, 2007 03:50 |
Multiphase charging interFoam question | coastal593 | OpenFOAM Running, Solving & CFD | 4 | March 12, 2007 07:46 |