|
[Sponsors] |
Integral boundary conditions turbulent intensitylength boundary conditions |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 27, 2006, 08:18 |
Here are my efforts to impleme
|
#1 |
Senior Member
Mark Olesen
Join Date: Mar 2009
Location: https://olesenm.github.io/
Posts: 1,714
Rep Power: 40 |
Here are my efforts to implement a mass-flux boundary condition. It seems to have improved convergence stabilty for rhoSimpleFoam, but doesn't seem to do the right thing for potentialFoam.
integral-bc.tar.gz Since k/epsilon at the inlet are unknown a priori for the mass-flux bc, I've also attempted an implementation for turbulent intensity and turbulent length boundary conditions. turblength-bc.tar.gz The fact that the integral bc doesn't work at all for potentialFoam makes me wonder a bit though. Perhaps someone will spot the problem. I've followed the motto "release early and release often" with the hopes that someone else will find the boundary conditions useful. /mark |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Burgerbs equation non constant Boundary Conditions Initial Conditions | arkangel | OpenFOAM Running, Solving & CFD | 1 | October 2, 2008 15:48 |
Boundary conditions for turbulent boundary layer | Thomas | FLUENT | 1 | June 17, 2008 06:14 |
boundary conditions for boundary layer flow | A. Al-zoubi | CFX | 0 | November 3, 2007 08:11 |
Turbulent boundary conditions for bubble column | anjai | FLUENT | 12 | October 17, 2005 07:34 |
Turbulent Mass Injection Boundary Conditions | B. Laubacher | Main CFD Forum | 6 | October 16, 1999 12:56 |