|
[Sponsors] |
April 18, 2011, 18:32 |
Temperature in chtMultiRegionFoam
|
#1 |
New Member
Join Date: Apr 2011
Posts: 1
Rep Power: 0 |
Hi OpenFoamers,
I have a problem with the chtMultiRegionFoamSolver in OF 1.7.0 when solving a hot cylinder in a fluid (T_fluid=300K, T_solid=370K). First, I made a mesh manually (with blockMesh) and the results were plausible, then I made a mesh with netgen out of an stl-file, with the same dimensions and same bc's, but the results are strange. There is no heat transport in the fluid, it seems the solver doesn't consider the hot surface. Also, the y-velocity does some strange things, but x-v. seems ok. Anyone any idea, why solving the case with a netgen-made geometry doesn't work like it did with the blockMesh geometry? Thanks for every comment :-) |
|
Tags |
chtmultiregionfoam, netgen, temperature |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with zeroGradient wall BC for temperature - Total temperature loss | cboss | OpenFOAM | 12 | October 1, 2018 07:36 |
Calculation of the Governing Equations | Mihail | CFX | 7 | September 7, 2014 07:27 |
[OpenFOAM] plot temperature vs time in paraview - chtMultiRegionFoam | phsieh2005 | ParaView | 2 | March 16, 2014 07:50 |
Increasing chtMultiRegionFoam Fluid Temperature | m.nichols19 | OpenFOAM | 0 | June 28, 2010 16:11 |
chtMultiRegionFoam case - temperature too high | phsieh2005 | OpenFOAM Running, Solving & CFD | 0 | April 24, 2010 09:53 |