|
[Sponsors] |
April 23, 2011, 23:00 |
interDyMFoam
|
#1 |
New Member
Join Date: Feb 2010
Posts: 27
Rep Power: 16 |
I encountered the following output message when executing interDyMFoam using version 1.7.0 and I am not sure whether I should continue or kill my run, since my linear and angular velocity becomes "nan" as shown below. If anyone can provide me some useful guideline. I greatly appreciated.
Thank you, -------------- Create time Create mesh for time = 0 Selecting dynamicFvMesh dynamicMotionSolverFvMesh Selecting motion solver: displacementLaplacian Selecting motion diffusion: inverseDistance Reading field p_rgh Reading field alpha1 Reading field U Reading/calculating face flux field phi Reading transportProperties Selecting incompressible transport model Newtonian Selecting incompressible transport model Newtonian Selecting turbulence model type RASModel Selecting RAS turbulence model kEpsilon kEpsilonCoeffs { Cmu 0.09; C1 1.44; C2 1.92; sigmaEps 1.3; } Reading g Calculating field g.h time step continuity errors : sum local = 0, global = 0, cumulative = 0 GAMGPCG: Solving for pcorr, Initial residual = 0, Final residual = 0, No Iterations 0 time step continuity errors : sum local = 0, global = 0, cumulative = 0 Courant Number mean: 0 max: 0 Starting time loop Interface Courant Number mean: 0 max: 0 Courant Number mean: 0 max: 0 deltaT = 0.0047619047619 Time = 0.0047619 Centre of mass: (4 0.2 0) Linear velocity: (nan nan nan) Angular velocity: (nan nan nan) |
|
Tags |
angular velocity, interdymfoam, linear velocity |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pressure instabilities with interDyMFoam for the floatingObject case | nbadano | OpenFOAM Running, Solving & CFD | 15 | October 15, 2021 06:35 |
GAMG problem in interDyMFoam? | ribe | OpenFOAM | 4 | July 17, 2013 22:23 |
interDyMFoam with GGI in 3d | stawrogin | OpenFOAM Running, Solving & CFD | 2 | January 5, 2011 02:17 |
error using interDyMFoam with kOmegaSST to simulate sloshing | anmartin | OpenFOAM Running, Solving & CFD | 0 | July 20, 2010 13:21 |
Turning interDymFoam into a turbulence solver | Saúl Balsa | OpenFOAM Running, Solving & CFD | 3 | June 30, 2010 16:09 |