|
[Sponsors] |
April 3, 2012, 14:54 |
Obtain values only at boundary during a run
|
#1 |
New Member
Wouter
Join Date: Mar 2012
Posts: 6
Rep Power: 14 |
Dear all,
For my own solver, I need to store only the pressure values at the wall (walls as specified in constant/polyMesh/boundary). This is then used as a source term for dipoles aeroacoustic sources. I was thinking to store a new volScalarField, with the values for p on the boundary for each time step. The internal field should be zero then. Is there a simple command to only obtain the boundary values of a volume scalar field, while the internal field should be empty/zero? Thanks in advance, Wouter |
|
Tags |
boundary pressure |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
Use sampled data from previous run as boundary condition for new setup | Arnoldinho | OpenFOAM Running, Solving & CFD | 3 | December 6, 2012 13:16 |
boundary values | OFU | OpenFOAM Programming & Development | 4 | August 9, 2011 06:27 |
How have boundary values set for calculated variables | olwi | OpenFOAM Running, Solving & CFD | 5 | August 25, 2006 11:56 |
Turbulence boundary values | lego | Main CFD Forum | 0 | October 24, 2002 13:47 |