OpenFOAM Running, Solving & CFD

Rating Thread / Thread Starter	Last Post	Replies	Views
On the PIMPLE algorithm vkrastev	April 16, 2012 11:13 by vkrastev	7	9,817
time step huge continuity errors, please take a look at my BCs mihaipruna	April 15, 2012 18:15 by mihaipruna	1	1,635
GGI dynamicMeshDict keyword 'direction' lordvon	April 14, 2012 20:31 by lordvon	0	1,336
very fragile mesh motion on SnappyHexMesh generated mesh matteoL	April 14, 2012 13:51 by matteoL	0	1,378
MPI Error - simpleFoam - Floating Point Exception scott	April 13, 2012 16:34 by 0.1 watts	3	10,803
Enhancing results thibautsimon1	April 13, 2012 03:44 by alberto	1	1,344
Sliding interface beetween rotor and stator in 2D krapic	April 12, 2012 17:31 by krapic	0	1,582
Couette Flow - The influence of viscosity nuovodna	April 12, 2012 08:47 by vdapalma	1	1,278
pimpleDyFoam mesh problems with interacting areas! magjohan	April 12, 2012 06:13 by kid	1	1,661
Pitz Daily oodles pressure field problem prapanj	April 12, 2012 01:49 by fluentfreak	3	4,363
2d aerofoil simpleFoam plm	April 11, 2012 16:44 by lucaBonfiglio	14	3,272
turbulence flat plane boundary garrison	April 11, 2012 08:58 by anishtain4	5	2,671
Using codestream in controlDict pad	April 11, 2012 03:59 by pad	0	1,832
SRFSimpleFoam Astarta	April 10, 2012 11:43 by Astarta	0	1,711
inletOutlet BC explanation mihaipruna	April 10, 2012 11:06 by mihaipruna	0	1,284
twoPhaseEulerFoam settling velocity of a dilute suspension otm	April 10, 2012 07:54 by otm	0	1,826
Tracking concentration in buoyantBoussinesqSimpleFoam risku9	April 10, 2012 03:14 by risku9	0	946
compressible homogenous turbulence anishtain4	April 10, 2012 02:05 by anishtain4	0	1,033
simpleFoam Delta wing 3D vortex rafamusura	April 9, 2012 23:53 by rafamusura	2	2,373
Interfoam - Problem with mesh quality ? danvica	April 9, 2012 13:58 by danvica	4	1,505
Standard Drag Model does not exist for sprayFoam arash1	April 8, 2012 17:52 by arash1	0	1,414
Extracting values from some areas gdeneyer	April 7, 2012 18:41 by gdeneyer	0	1,087
setting up a bubbleFoam case matt.mech.eng	April 6, 2012 22:20 by matt.mech.eng	0	1,321
cyclic boundary conditions tuulio	April 6, 2012 12:07 by tuulio	0	1,351
OF 2.1.0 Symmetry BC Problem plm	April 6, 2012 03:04 by prasanth	5	1,924
decomposeParDict errors when deleted mihaipruna	April 5, 2012 14:31 by alberto	9	1,294
Parallel run - number of processors danvica	April 5, 2012 11:57 by alberto	4	1,992
simple Foam empty solution tellico	April 4, 2012 17:20 by tellico	6	1,301
Numerical errors in nested domain with pre-calculated boundary values Arnoldinho	April 4, 2012 10:31 by Arnoldinho	3	2,138
Different relaxation factors for U components Attesz	April 4, 2012 02:30 by alberto	1	1,239
Obtain values only at boundary during a run wcpvandervelden	April 3, 2012 14:54 by wcpvandervelden	0	905
Multiple consecutive runs batch/script Cav	April 3, 2012 07:31 by Cav	2	1,965
sprayFoam results depend on the type of chemistryReader (chemkinReader/foamChemistry arash1	April 2, 2012 12:47 by arash1	1	2,110
Axi - symmetric flow in OpenFOAM ivanddd	April 2, 2012 05:06 by ivanddd	0	1,515
Problem computing divergence field gdeneyer	April 2, 2012 02:34 by alberto	1	1,157
MultiregionSolver mm.abdollahzadeh	April 1, 2012 08:22 by mm.abdollahzadeh	1	1,131
Setting up case with a moving part between to static ones Kaskade	April 1, 2012 01:13 by Kaskade	6	1,572
Can't run in parallel JulytoNovember	March 31, 2012 09:28 by JulytoNovember	2	1,934
Problem with FloatingObject Leech	March 29, 2012 15:24 by nsf	10	3,592
simpleFoam /water in pipes/ how to obtain and tune the solution? soonic	March 29, 2012 10:40 by soonic	0	2,760

Read this first: How to ask a question on the forums

Page 376 of 481

376

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 03:32.