HOWTO simpleSRFFoam

JunaidAhmad · April 26, 2011, 07:47

Hi.

I started to use OF a couple of weeks ago and i try to run the tutorials that are given in OF-1.7.1. and understand a lot with those.
Now i am trying to run mixer tutorial that use simpleSRFFoam so i follow these step:

blockMesh (For Mesh Building)
then i use simpleSRFFoam and i get:
simpleSRFFoam: command not found

can some one identify the problem

Regards
Junaid

kurne · April 26, 2011, 08:30

Dear Junaid Ahmad Khan

Go to simpleSRFFoam folder through terminal and just simply compile it by typing wmake and then to mixer folder and run the case.

Cheers............

JunaidAhmad · April 27, 2011, 04:13

Cheers shared .........

Rely appreciate your concern.

Regards

Junaid

JunaidAhmad · April 27, 2011, 04:44

Dear Kurne,

can you tell me how to view complete rotor of mixer. as it shows only single rotor blade.

Regards,

Junaid

kurne · April 27, 2011, 06:34

Dear JunaidAhmad

It is the case for single blade hence one rotor is there.

Take care

JunaidAhmad · April 27, 2011, 06:54

I mean to say that in Gambit i design single rotor with periodic boundary condition and then in Fluent i rotate it and get the full view of the rotor so what i want to know that is there any option that show me the complete mixer or if there is a symmetric boundary can we somehow view it reflection. or something like that....

Regards,

Junaid Ahmad

kurne · April 27, 2011, 07:06

Hi JunaidAhmad

Means you want this to visualize the results.Then in paraview go in filters and then use alphabetical tools and then it go in Rotational Extrusion.

But remember first create the vector plot i.e. Glyph and then only Rotational Extrusion tools will work.

Hope this is what u want.

Cheers......

kurne · May 11, 2011, 00:15

Hi

Check the createPatch directory.

huangxianbei · September 12, 2014, 22:03

Quote:

Originally Posted by kurne

Hi JunaidAhmad

Means you want this to visualize the results.Then in paraview go in filters and then use alphabetical tools and then it go in Rotational Extrusion.

But remember first create the vector plot i.e. Glyph and then only Rotational Extrusion tools will work.

Hope this is what u want.

Cheers......

Hi,Kurne:
I tried to use the Rotational Extrusion, while the result turns out to be a mass~~How does this come from?

XIanbei

April 26, 2011, 07:47	HOWTO simpleSRFFoam	#1
JunaidAhmad Member Junaid Ahmad Khan Join Date: Mar 2010 Location: Islamabad Posts: 43 Rep Power: 16	Hi. I started to use OF a couple of weeks ago and i try to run the tutorials that are given in OF-1.7.1. and understand a lot with those. Now i am trying to run mixer tutorial that use simpleSRFFoam so i follow these step: blockMesh (For Mesh Building) then i use simpleSRFFoam and i get: simpleSRFFoam: command not found can some one identify the problem Regards Junaid

April 26, 2011, 08:30		#2
kurne Member Kurne Join Date: Aug 2010 Location: Pune, INDIA Posts: 88 Rep Power: 15	Dear Junaid Ahmad Khan Go to simpleSRFFoam folder through terminal and just simply compile it by typing wmake and then to mixer folder and run the case. Cheers............ JunaidAhmad likes this. __________________ Simulation Is Determination Of Imagination Towards Approximation ® Best Regards Mubeen K Kurne

April 27, 2011, 04:13	Bundle of Thanks	#3
JunaidAhmad Member Junaid Ahmad Khan Join Date: Mar 2010 Location: Islamabad Posts: 43 Rep Power: 16	Cheers shared ......... Rely appreciate your concern. Regards Junaid

April 27, 2011, 04:44	HOWTO simpleSRFFoam View Complete Mixer in ParaFoam/paraview	#4
JunaidAhmad Member Junaid Ahmad Khan Join Date: Mar 2010 Location: Islamabad Posts: 43 Rep Power: 16	Dear Kurne, can you tell me how to view complete rotor of mixer. as it shows only single rotor blade. Regards, Junaid

April 27, 2011, 06:34		#5
kurne Member Kurne Join Date: Aug 2010 Location: Pune, INDIA Posts: 88 Rep Power: 15	Dear JunaidAhmad It is the case for single blade hence one rotor is there. Take care __________________ Simulation Is Determination Of Imagination Towards Approximation ® Best Regards Mubeen K Kurne Last edited by kurne; April 27, 2011 at 07:09.

April 27, 2011, 06:54		#6
JunaidAhmad Member Junaid Ahmad Khan Join Date: Mar 2010 Location: Islamabad Posts: 43 Rep Power: 16	I mean to say that in Gambit i design single rotor with periodic boundary condition and then in Fluent i rotate it and get the full view of the rotor so what i want to know that is there any option that show me the complete mixer or if there is a symmetric boundary can we somehow view it reflection. or something like that.... Regards, Junaid Ahmad

April 27, 2011, 07:06		#7
kurne Member Kurne Join Date: Aug 2010 Location: Pune, INDIA Posts: 88 Rep Power: 15	Hi JunaidAhmad Means you want this to visualize the results.Then in paraview go in filters and then use alphabetical tools and then it go in Rotational Extrusion. But remember first create the vector plot i.e. Glyph and then only Rotational Extrusion tools will work. Hope this is what u want. Cheers...... __________________ Simulation Is Determination Of Imagination Towards Approximation ® Best Regards Mubeen K Kurne Last edited by kurne; May 11, 2011 at 00:10.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
simpleSRFFoam and forces	macbeth	OpenFOAM Running, Solving & CFD	7	February 20, 2014 03:17
simpleSRFFoam error in OpenFOAM 1.5-dev	kurne	OpenFOAM	5	April 20, 2011 07:00
simpleSRFFoam in OpenFOAM 1.5-Dev	kurne	OpenFOAM	2	March 18, 2011 22:28
erros when compiling simpleSRFFoam	examosty	OpenFOAM Installation	12	April 26, 2010 18:53
A new Howto on the OpenFOAM Wiki Compiling OpenFOAM under Unix	mbeaudoin	OpenFOAM Installation	2	April 28, 2006 08:54