validation PaSR model

chbenz · August 31, 2009, 09:25

Hi,

i want to validate the partially stirred reactor model, which is implemented in OF. My idea was to set up a testcase and compare simulation vs experiment, but i can`t find a validation-case to my regret. Does anybody has an idea which case is appropriate to validate the PaSR model?

Regards,
Christof.

markusrehm · September 6, 2009, 23:20

Hello,

have a look at the TNF testflames discussed at the TNF workshops at

http://public.ca.sandia.gov/TNF

Regards, Markus.

chbenz · September 7, 2009, 03:09

Hi Markus,

i know this page, but i dont want to validate with a stady state flame. I want to simulate unsteady ignition processes in a turbulent environment. Thererfor i need an unsteady testcase. could you give me any tips?

regards,
Christof

markusrehm · September 7, 2009, 14:13

Hello,

in the TNF 9 Proceedings page 44 there is a table of experimental flames. Maybe that helps.

Regards, Markus.

yashar.afarin · February 8, 2011, 06:07

Quote:

Originally Posted by chbenz

Hi,

i want to validate the partially stirred reactor model, which is implemented in OF. My idea was to set up a testcase and compare simulation vs experiment, but i can`t find a validation-case to my regret. Does anybody has an idea which case is appropriate to validate the PaSR model?

Regards,
Christof.

Hi christof

have you found any validation-case? could you validate PaSR model? what was the result?

Best Regards,

chbenz · February 8, 2011, 07:30

Hi,
not yet. it is still in progress. Maybe i will post some results later.

Christof

August 31, 2009, 09:25	validation PaSR model	#1
chbenz Member Christof Benz Join Date: Mar 2009 Posts: 52 Rep Power: 10	Hi, i want to validate the partially stirred reactor model, which is implemented in OF. My idea was to set up a testcase and compare simulation vs experiment, but i can`t find a validation-case to my regret. Does anybody has an idea which case is appropriate to validate the PaSR model? Regards, Christof.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Superlinear speedup in OpenFOAM 13	msrinath80	OpenFOAM Running, Solving & CFD	18	March 3, 2015 06:36
LES and combustion model	Margherita Cadorin	CFX	0	October 29, 2008 06:24
simulation results for k-w model and SST model	Li	CFX	7	June 29, 2007 04:19
Cavitation Model Validation	Neil	Main CFD Forum	0	January 8, 2004 09:47
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model	Jonas Larsson	FLUENT	5	March 13, 2000 04:27

September 6, 2009, 23:20		#2
markusrehm Senior Member Markus Rehm Join Date: Mar 2009 Location: Erlangen (Germany) Posts: 182 Rep Power: 10	Hello, have a look at the TNF testflames discussed at the TNF workshops at http://public.ca.sandia.gov/TNF Regards, Markus.

September 7, 2009, 03:09		#3
chbenz Member Christof Benz Join Date: Mar 2009 Posts: 52 Rep Power: 10	Hi Markus, i know this page, but i dont want to validate with a stady state flame. I want to simulate unsteady ignition processes in a turbulent environment. Thererfor i need an unsteady testcase. could you give me any tips? regards, Christof

September 7, 2009, 14:13		#4
markusrehm Senior Member Markus Rehm Join Date: Mar 2009 Location: Erlangen (Germany) Posts: 182 Rep Power: 10	Hello, in the TNF 9 Proceedings page 44 there is a table of experimental flames. Maybe that helps. Regards, Markus.

February 8, 2011, 07:30		#6
chbenz Member Christof Benz Join Date: Mar 2009 Posts: 52 Rep Power: 10	Hi, not yet. it is still in progress. Maybe i will post some results later. Christof