cyclic boundary with layering 1.5-dev

aj1 · June 8, 2010, 08:46

Hi,
Does anyone know of a way to use piston-cylinder mesh layering (for example layerAR addition/removal) with cyclic boundaries? in openfoam 1.5-dev. It seems that this is not possible and only mesh deformation
without layer addition/removal can be used with cyclic boundaries.

Thanks in advance for anyone's time to respond.

hjasak · June 9, 2010, 12:16

Why? - to my knowledge it works fine and the boys in Milan use it every day to simulate internal combustion engines. Are you sure you've set it up correctly?

June 8, 2010, 08:46	cyclic boundary with layering 1.5-dev	#1
aj1 New Member Join Date: Apr 2010 Posts: 1 Rep Power: 0	Hi, Does anyone know of a way to use piston-cylinder mesh layering (for example layerAR addition/removal) with cyclic boundaries? in openfoam 1.5-dev. It seems that this is not possible and only mesh deformation without layer addition/removal can be used with cyclic boundaries. Thanks in advance for anyone's time to respond.

June 9, 2010, 12:16		#2
hjasak Senior Member Hrvoje Jasak Join Date: Mar 2009 Location: London, England Posts: 1,905 Rep Power: 33	Why? - to my knowledge it works fine and the boys in Milan use it every day to simulate internal combustion engines. Are you sure you've set it up correctly? __________________ Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wind turbine simulation	Saturn	CFX	58	July 3, 2020 01:13
Problem with cyclic boundaries in Openfoam 1.5	fs82	OpenFOAM	36	January 7, 2015 00:31
[OpenFOAM] Paraview/Parafoam in OpenFoam 1.5 dev	titio	ParaView	0	December 9, 2009 12:12
Adaptive Mesh Refinement and Cyclic Boundary Conditions	adona058	OpenFOAM Running, Solving & CFD	6	October 23, 2009 09:17
cyclic boundary conditions..	Zerrin	Siemens	0	June 11, 2005 13:49